https://community.hpe.com/t5/operating-system-openvms/advanced-server-v7-3a-eco3-heads-up/m-p/3348602#M63778 Noticed during the install of Advanced Server ECO3 that it complained about NCL not found in sys$system while in POSTINSTALL. System not running DECnet Phase V, so message should not be seen. That is, if a bug was not lurking.<BR /><BR />While the kit does install and runs as advertised, if you do the recommended terminate when prompted, $product show history will not report ECO3 as being installed, nor will it show ECO2 as being deinstalled.<BR /><BR />Responding "no" to the terminate message, updates the PCSI database properly and causes no other harm.<BR /><BR />I called support on this and we were not the only site to report this behavior. Its being sent to engineering for a fixup. Tue, 03 Aug 2004 17:55:42 GMT Dave Gudewicz 2004-08-03T17:55:42Z https://community.hpe.com/t5/operating-system-openvms/advanced-server-v7-3a-eco3-heads-up/m-p/3348602#M63778 Noticed during the install of Advanced Server ECO3 that it complained about NCL not found in sys$system while in POSTINSTALL. System not running DECnet Phase V, so message should not be seen. That is, if a bug was not lurking.<BR /><BR />While the kit does install and runs as advertised, if you do the recommended terminate when prompted, $product show history will not report ECO3 as being installed, nor will it show ECO2 as being deinstalled.<BR /><BR />Responding "no" to the terminate message, updates the PCSI database properly and causes no other harm.<BR /><BR />I called support on this and we were not the only site to report this behavior. Its being sent to engineering for a fixup. Tue, 03 Aug 2004 17:55:42 GMT https://community.hpe.com/t5/operating-system-openvms/advanced-server-v7-3a-eco3-heads-up/m-p/3348602#M63778 Dave Gudewicz 2004-08-03T17:55:42Z