https://community.hpe.com/t5/operating-system-openvms/smartarray-5302/m-p/3413925#M65438 and webes can be obtained from<BR /><A href="http://h18023.www1.hp.com/support/svctools/webes/" target="_blank">http://h18023.www1.hp.com/support/svctools/webes/</A><BR /><BR />You would be running it anyway on a DS25. Wed, 03 Nov 2004 13:20:08 GMT Ian Miller. 2004-11-03T13:20:08Z https://community.hpe.com/t5/operating-system-openvms/smartarray-5302/m-p/3413923#M65436 I have a SmartArray 5302 on a DS25 running VMS 7.3-2. Does anyone know if its possible to direct controller events to the VMS console. If a volume set becomes degraded then I want to be able to see a message on the console. I have the mgmt_agents installed and can see the controller via a browser, but just wondered if I could get messages sent to the console. Wed, 03 Nov 2004 09:10:15 GMT https://community.hpe.com/t5/operating-system-openvms/smartarray-5302/m-p/3413923#M65436 Alvescot 2004-11-03T09:10:15Z https://community.hpe.com/t5/operating-system-openvms/smartarray-5302/m-p/3413924#M65437 The SEA component of WEBES 4.3.4 lists the Smart Array 5304 controller as supported for OpenVMS for analysis and bit-to-text translation.<BR /><BR />So if you would be running WEBES 4.3.4, you could expect to receive a mail notification, if there is a problem on the Smart Array...<BR /><BR />Volker. Wed, 03 Nov 2004 13:10:40 GMT https://community.hpe.com/t5/operating-system-openvms/smartarray-5302/m-p/3413924#M65437 Volker Halle 2004-11-03T13:10:40Z https://community.hpe.com/t5/operating-system-openvms/smartarray-5302/m-p/3413925#M65438 and webes can be obtained from<BR /><A href="http://h18023.www1.hp.com/support/svctools/webes/" target="_blank">http://h18023.www1.hp.com/support/svctools/webes/</A><BR /><BR />You would be running it anyway on a DS25. Wed, 03 Nov 2004 13:20:08 GMT https://community.hpe.com/t5/operating-system-openvms/smartarray-5302/m-p/3413925#M65438 Ian Miller. 2004-11-03T13:20:08Z