https://community.hpe.com/t5/operating-system-openvms/eof-operator-log/m-p/3522035#M67726 I installed 8.2 on an Alphastation 500.<BR />When I boot the system, the EOF of the operator logfile stays on 0 while allocation is at 96. Only after 5 minutes the EOF is posted.<BR /><BR />Is there a way to influence the time used in this defered write ? I had this problem on other versions of VMS too.<BR /><BR />Wim Mon, 11 Apr 2005 07:02:13 GMT Wim Van den Wyngaert 2005-04-11T07:02:13Z https://community.hpe.com/t5/operating-system-openvms/eof-operator-log/m-p/3522035#M67726 I installed 8.2 on an Alphastation 500.<BR />When I boot the system, the EOF of the operator logfile stays on 0 while allocation is at 96. Only after 5 minutes the EOF is posted.<BR /><BR />Is there a way to influence the time used in this defered write ? I had this problem on other versions of VMS too.<BR /><BR />Wim Mon, 11 Apr 2005 07:02:13 GMT https://community.hpe.com/t5/operating-system-openvms/eof-operator-log/m-p/3522035#M67726 Wim Van den Wyngaert 2005-04-11T07:02:13Z https://community.hpe.com/t5/operating-system-openvms/eof-operator-log/m-p/3522036#M67727 It appears after a quick look at the sources for opcom that its a fixed five minutes. Mon, 11 Apr 2005 07:28:05 GMT https://community.hpe.com/t5/operating-system-openvms/eof-operator-log/m-p/3522036#M67727 Ian Miller. 2005-04-11T07:28:05Z