https://community.hpe.com/t5/operating-system-openvms/booting-from-eva-4000/m-p/4908795#M69396 Thank you Tue, 05 Jul 2005 05:48:39 GMT Valentin Likoum 2005-07-05T05:48:39Z https://community.hpe.com/t5/operating-system-openvms/booting-from-eva-4000/m-p/4908793#M69394 Hello all,<BR /><BR /> Accordinly to "SAN design reference guide" (http:h20000.www2.hp.com/bc/docs/support/SupportManual/c00093931/c00093931.pdf&amp;pos=5), section "Booting from the SAN" (page 169), VMS (and nobody else) can not boot from the EVA4000,6k and 8k but only from 3k and 5k. Is it still true? Or this restriction is obsolete?<BR /> Thank you.<BR /><BR />--<BR /> Valentin. Thu, 23 Jun 2005 05:18:28 GMT https://community.hpe.com/t5/operating-system-openvms/booting-from-eva-4000/m-p/4908793#M69394 Valentin Likoum 2005-06-23T05:18:28Z https://community.hpe.com/t5/operating-system-openvms/booting-from-eva-4000/m-p/4908794#M69395 Valentin, according to a bulliten I just received from HP, the answer is a qualified yes. You must be running VMS7-3.2 or highers, and using an HP Fibre Channel HBA on the Alpha. Mon, 27 Jun 2005 06:55:35 GMT https://community.hpe.com/t5/operating-system-openvms/booting-from-eva-4000/m-p/4908794#M69395 Aaron Lewis_1 2005-06-27T06:55:35Z https://community.hpe.com/t5/operating-system-openvms/booting-from-eva-4000/m-p/4908795#M69396 Thank you Tue, 05 Jul 2005 05:48:39 GMT https://community.hpe.com/t5/operating-system-openvms/booting-from-eva-4000/m-p/4908795#M69396 Valentin Likoum 2005-07-05T05:48:39Z