topic Re: NTP configuration TIMEZONE in Operating System - OpenVMS

NTP configuration TIMEZONE

Taulant Shamo — Mon, 05 Sep 2005 01:12:48 GMT

Hello,

I finally did it to configure NTP client both systems are syncronized.
But the problem is that the systems are on hour behind.

i.e the time now is 08:00 and these 2 sytems have the time 07:00

from the TCPWARE_CONFIGURE I see these configuration:

SCCRA2$ SEARCH TCPWARE:TCPWARE_CONFIGURE.COM TIMEZONE,NTP
$ NETCU_TIMEZONE == "+0100"
$ NETCU_TIMEZONE_NAME == ""
$ NETCU_TIMEZONE_RULES == ""
$! *** NTP parameters ***
$ NTP_ENABLE == 1

Thanks

Re: NTP configuration TIMEZONE

Peter Quodling — Mon, 05 Sep 2005 02:15:03 GMT

TCPWare --- I think you might have better success going to www.process.com (Process software) own TCPware, don't they? Any NTP support that you get here, will relate to HP TCPIP.

You probably want to use netcu to define the timezone to be one of the entries in tcpware:timezone.dat

Check out the netcu manual on the support section of the process.com website, for more specifics...

q

Re: NTP configuration TIMEZONE

Ian Miller. — Mon, 05 Sep 2005 04:27:12 GMT

tcpware documentation is online at
http://www.process.com/tcpip/tcpdocs.html

Re: NTP configuration TIMEZONE

Geoff Bryant — Tue, 06 Sep 2005 10:31:37 GMT

You can configure NTP by:

$ @TCPWARE:CNFNET NTP