topic Re: UCX Log Option in Operating System - OpenVMS

UCX Log Option

Mainak — Thu, 05 Jan 2006 07:24:21 GMT

Hi ,

I am trying to enable the option in UCX with the following command -

$ ucx set service telnet/log=(file=sys$manager:aaa.log)

It is not returning any error. But when I am checking it ( ucx show service telnet / fu ), it is showing -

Log Opt: Actv Dactv Conn Error etc
file: not defined

Ucx version is 4.2

Please Advise

Mainak

Re: UCX Log Option

Wim Van den Wyngaert — Thu, 05 Jan 2006 08:01:18 GMT

Add /perm to the show command.
You need to disable / enable the service before it is active.
Be aware : this will disconnect all sessions.

Wim

Re: UCX Log Option

Mainak — Thu, 05 Jan 2006 08:54:37 GMT

Its not accepting the /perm option with the command.

Re: UCX Log Option

Wim Van den Wyngaert — Thu, 05 Jan 2006 09:04:46 GMT

Did you do
ucx show servi telnet/perm/fu ?

Wim

Re: UCX Log Option

Mainak — Thu, 05 Jan 2006 09:12:37 GMT

when I am using -

$ UCX SET SERVICE TELNET/LOG=SYS$MANAGER:AAA.LOG/PERM

It is returning -

%CLI-W-IVQUAL, unrecognized qualifier
\PERM\

Re: UCX Log Option

Ian Miller. — Thu, 05 Jan 2006 09:16:16 GMT

/PERM is a qualifer for SHOW SERVICE. It shows what settings you will get after you restart.

Re: UCX Log Option

Mainak — Thu, 05 Jan 2006 09:29:35 GMT

There is no change befire and after the command -

$ UCX SH SERVICE TELNET/FU/PERM

Service: TELNET

Port: 23 Protocol: TCP Address: 0.0.0.0

Inactivity: 1 User_name: not defined Process: not defined

Limit: 50

File: not defined

Flags: Listen Rtty UCX

Socket Opts: Keepalive Rcheck Scheck

Receive: 3000 Send: 3000

Log Opts: Actv Dactv Conn Error Logi Logo Mdfy Rjct

File: not defined

Security

Reject msg: not defined

Accept host: 0.0.0.0

Accept netw: 0.0.0.0
$ UCX SET SERVICE TELNET /LOG=FILE=SYS$MANAGER:AAA.LOG

$ UCX SH SERVICE TELNET/FU/PERM

Service: TELNET

Port: 23 Protocol: TCP Address: 0.0.0.0
Inactivity: 1 User_name: not defined Process: not defined
Limit: 50

File: not defined
Flags: Listen Rtty UCX

Socket Opts: Keepalive Rcheck Scheck
Receive: 3000 Send: 3000

Log Opts: Actv Dactv Conn Error Logi Logo Mdfy Rjct
File: not defined

Security
Reject msg: not defined
Accept host: 0.0.0.0
Accept netw: 0.0.0.0

Re: UCX Log Option

Wim Van den Wyngaert — Thu, 05 Jan 2006 09:40:53 GMT

ucx 4.2 eco 1 : same behaviour.
Bug ?

Wim

Re: UCX Log Option

Mainak — Thu, 05 Jan 2006 09:43:06 GMT

UCX> sh ver

Digital TCP/IP Services for OpenVMS VAX Version V4.2 - ECO 5
on a VAX 4000-106A running OpenVMS V7.1

Re: UCX Log Option

Wim Van den Wyngaert — Thu, 05 Jan 2006 09:43:26 GMT

It works for service ftp.
The program must think that it has no use for telnet and thus ignores the option.

Wim

Re: UCX Log Option

Mainak — Thu, 05 Jan 2006 10:57:53 GMT

Could any one tel me about the following -

UCX> show dev bg1396/fu
Device_socket: bg1396 Type: STREAM LOCAL REMOTE
Port: 23 1216
Host: TGDV12 THDV42
Service: TELNET Terminal: TNA1:

RECEIVE SEND
Queued I/O 0 0
Q0LEN 0 Socket buffer bytes 0 2
QLEN 0 Socket buffer quota 3000 3000
QLIMIT 0 Total buffer alloc 0 1828
TIMEO 0 Total buffer limit 12000 12000
ERROR 0 Number of XONs 0 0
OOBMARK 0 Number of XOFFs 0 0
I/O completed 243 386
Bytes transferred 390 13575

Options: REUSEADR KEEP OOBINLINE
State: ISCONNECTED PRIV
RCV Buff: WAIT
SND Buff: SEL

What is the meaning of the bottom section -

Options: REUSEADR KEEP OOBINLINE
State: ISCONNECTED PRIV
RCV Buff: WAIT
SND Buff: SEL
i.e. -> Option: keep or Option: REUSEADR or RCV Buff: WAIT etc ..

Could any one provide me any document explaing this all for UCX 4.2.

Thanks.

Re: UCX Log Option

Wim Van den Wyngaert — Thu, 05 Jan 2006 11:28:14 GMT

Options: REUSEADR KEEP OOBINLINE

oobinline indicates Out Of Band (exception handling)
keep stands for keepalive
reuseadr indicates that bind may reuse local information instead of rebinding

State: ISCONNECTED PRIV

isconnected is what it says
priv is ???

RCV Buff: WAIT
SND Buff: SEL

??? Google ???

Wim

Re: UCX Log Option

Jan van den Ende — Thu, 05 Jan 2006 12:48:20 GMT

Mainak,

UCX 4.x is a bit faded in my memory, but ISTR that it behaved a lot like TCPIP services.
The syntax of things IP has always been a little (too much in my opinion) non-VMSsy, but Unixian.
Instead of /PERM it is:
$ TCPIP CONFIG SET whatever is to be set
for the PERMANENT info. And yeah, it needs a restart.

hth

Proost.

Have one on me.

jpe