DECnet PhaseIV and LAN Failover: Startup Errors

Martin_H — Thu, 06 Jul 2006 09:05:56 GMT

hi,

i got a customer using VMS 7.3-2 lan failover and decnet phaseIV. when he boots the system he gets the following error-messages:

%NCP-W-OPEFAI, Operation failure
%SYSTEM-F-ILLIOFUNC, illegal I/O function code

and

%NCP-W-UNRCMP, Unrecognized component, Circuit
Circuit = EIA-0

for each adapter he has defined in the
failover-sets.

the strange thing is, that

NCP>SHOW KNOWN LINE or NCP>SHOW KNOWN CIRCUIT

only displays the two defined failover-sets LLA-0 and LLA-1!

the startup logfile shows that the LLDRIVER is loaded correctly and that DECnet is the first protocol to be started - see the attachment. decnet seems to be working but the customer wants to know why he gets this errors...

any suggestions?

thanks and regards,
martin

Re: DECnet PhaseIV and LAN Failover: Startup Errors

Volker Halle — Thu, 06 Jul 2006 09:10:31 GMT

Martin,

welcome to the OpenVMS ITRC forum.

Looks like the old circuits may still be defined in the DECnet permanent database:

$ MC NCP LIS KNOWN CIRC

If so,

$ MC NCP PURGE CIRC eia-0 ALL

will get rid of them (use: eia-0, eib-0, ewa-0, ewa-1).

Volker.

topic DECnet PhaseIV and LAN Failover: Startup Errors in Operating System - OpenVMS

DECnet PhaseIV and LAN Failover: Startup Errors

Re: DECnet PhaseIV and LAN Failover: Startup Errors