Node names not displayed by LANCP

james_a_wells — Thu, 28 Sep 2006 04:38:09 GMT

Since upgrading from v7.2-3 to v8.2
and converting the Node and Device databases
the error messages do not display the node
name

i.e command
SET NODE I/ALL/PERMANENT

producer the error line:
%LANCP-E-NODENFND, Node not found in LAN node database, node !AC

Although this is correct as there are no nodes
starting with I the node name is not displayed
under v7.2-3 the node name would be displayed.

i.e.
LANCP-E-NODENFND, Node not found in LAN node database, node I !AC

Simply solution is to remove these commands and
no error messages would be displayed but i am wondering is anyone else has come across this and fixed it by displaying a proper error message.

Re: Node names not displayed by LANCP

Karl Rohwedder — Thu, 28 Sep 2006 04:53:51 GMT

Don't know a fix, but can confirm this 'error' also on V8.3/Alpha.

regards Kalle

topic Node names not displayed by LANCP in Operating System - OpenVMS

Node names not displayed by LANCP

Re: Node names not displayed by LANCP