https://community.hpe.com/t5/operating-system-openvms/product-undo-and-need-to-reboot-afterwards/m-p/5028241#M81860 OpenVMS 7.3-2 on GS160 Model 16.<BR /><BR />Recently installed UPDATE9 patch along with all other available patches beyond UPDATE9 like FIBRE_SCSI v10 and SYS v11, which required system reboot.<BR /><BR />I would surmize that if a PRODUCT UNDO is done on any patch that required a reboot to go in, that at the end of the PRODUCT UNDO, it will want to reboot and/or I should reboot to have full effect of rolling back/out the patch.<BR /><BR />Comments anyone?<BR /><BR />:) jck Tue, 13 Feb 2007 14:06:10 GMT John Koska 2007-02-13T14:06:10Z https://community.hpe.com/t5/operating-system-openvms/product-undo-and-need-to-reboot-afterwards/m-p/5028241#M81860 OpenVMS 7.3-2 on GS160 Model 16.<BR /><BR />Recently installed UPDATE9 patch along with all other available patches beyond UPDATE9 like FIBRE_SCSI v10 and SYS v11, which required system reboot.<BR /><BR />I would surmize that if a PRODUCT UNDO is done on any patch that required a reboot to go in, that at the end of the PRODUCT UNDO, it will want to reboot and/or I should reboot to have full effect of rolling back/out the patch.<BR /><BR />Comments anyone?<BR /><BR />:) jck Tue, 13 Feb 2007 14:06:10 GMT https://community.hpe.com/t5/operating-system-openvms/product-undo-and-need-to-reboot-afterwards/m-p/5028241#M81860 John Koska 2007-02-13T14:06:10Z https://community.hpe.com/t5/operating-system-openvms/product-undo-and-need-to-reboot-afterwards/m-p/5028242#M81861 I'd agree with you, and the behavior of UPDATE <MUMBLE> on 7.3-2 would tend to confirm this. The update which included LAN failover for DE-500s. I had an issue with this, long since resolved. The PRODUCT UNDO required a reboot to restore previous behavior. <BR /><BR />Andy</MUMBLE> Tue, 13 Feb 2007 14:24:29 GMT https://community.hpe.com/t5/operating-system-openvms/product-undo-and-need-to-reboot-afterwards/m-p/5028242#M81861 Andy Bustamante 2007-02-13T14:24:29Z https://community.hpe.com/t5/operating-system-openvms/product-undo-and-need-to-reboot-afterwards/m-p/5028243#M81862 Thanks Andy. Hopefully you got the points I tried to assign. Will be closing thread, since you nailed it with your pass experience with PRODUCT UNDO.<BR /><BR />:) jck Tue, 13 Feb 2007 14:32:12 GMT https://community.hpe.com/t5/operating-system-openvms/product-undo-and-need-to-reboot-afterwards/m-p/5028243#M81862 John Koska 2007-02-13T14:32:12Z https://community.hpe.com/t5/operating-system-openvms/product-undo-and-need-to-reboot-afterwards/m-p/5028244#M81863 Closing thread. Thanks again. What a nice place to get an answer!<BR /><BR />:) jck Tue, 13 Feb 2007 14:32:57 GMT https://community.hpe.com/t5/operating-system-openvms/product-undo-and-need-to-reboot-afterwards/m-p/5028244#M81863 John Koska 2007-02-13T14:32:57Z