topic Re: ACMS 5.0A (Development) in Operating System - OpenVMS

ACMS 5.0A (Development)

Paul Whapshott — Mon, 18 Jun 2007 03:12:39 GMT

Hi,

At the weekend I upgraded our Development Server from 7.3-2 to 8.3.
I also upgraded ACMS DEV from 4.4B to 5.0A and RDB to version 7.2.1

After the convertion of the rdb databases I attempt to start one of the ACMS apps and receive the following error in SWLUP.

Q; Does anyone have any ideas what may be causing the below error;

ACMS$EXC_EW ^B2%ACMSMSS-E-ERRNETCRE, Error creating DECnet object
Username : S$EXC_EW ^B2%ACMSMSS-E-ERRNETCRE, Error creating DECnet objectD-SYS
TEM-F-TOOMU
Image file : DGA20:[SYS0.SYSCOMMON.][SYSEXE]ACMSE

MSMSS-E-ERRNETCRE, Error creating DECnet objectD-SYSTEM-F-TOOMUCHDA
A, too much optional or interrupt data specifie.

Luckily this was a test upgrade on another set of disks and I have rebooted the server back off the 7.3-2 disks but if anyone has any pointers to the above error it would be helpful.

Thanks,

Paul

Re: ACMS 5.0A (Development)

Duncan Morris — Mon, 18 Jun 2007 05:29:50 GMT

Hi Paul,

see HELP/MESS TOOMUCHDATA

o An attempt to declare an additional DECnet object failed because the maximum number of objects allowed by the local DECnet node already exists.

Check your DECnet settings. Are you using Phase IV or DNVOSI?

Duncan

Re: ACMS 5.0A (Development)

Paul Whapshott — Mon, 18 Jun 2007 05:31:39 GMT

Duncan,

We are using DECNET Phase 4.

Paul

Re: ACMS 5.0A (Development)

Duncan Morris — Mon, 18 Jun 2007 05:47:48 GMT

Hi,

use

MC NCP SHOW CHAR EXEC

to see maximum declared objects value:

Maximum Declared Objects = 31

You may need to increase this if you have lots of objects being declared.

NCP> DEF EXEC MAXIMUM DECLARED OBJECTS nn

Duncan