topic Re: reg:host name in Operating System - OpenVMS

reg:host name

p.balamurugan — Sun, 05 Aug 2007 21:48:49 GMT

when i issue the command show network. I am unable to see the host name. how to correct this problem.

Re: reg:host name

Simon Fedele — Sun, 05 Aug 2007 22:38:05 GMT

Have you configured TCPIP Services yet ?

@sys$manager:tcpip$config

Please also post output of "show network"

Re: reg:host name

Jiri_5 — Tue, 07 Aug 2007 02:46:56 GMT

Have you in systartup_vms.com this line?

$ @Sys$Startup:Sys$Net_Services

Re: reg:host name

The Brit — Tue, 07 Aug 2007 07:08:43 GMT

Please post the output from

$ pipe show log | search sys$input

Dave

Re: reg:host name

The Brit — Tue, 07 Aug 2007 07:13:45 GMT

Also can you confirm which TCPIP stack you are using! i.e. TCPWARE, TCPIP Services, Multinet, etc.

Dave

Re: reg:host name

Willem Grooters — Wed, 08 Aug 2007 01:36:34 GMT

No names means "no network".

SHOW NETWOK will show the nodenames - and addresses - only if networking has been configured - either TCPIP, DECNet or both. Default for an OpenVMS installation is NO NETWORK, you have to configure it explicitly.