cpu usage in rx 3600

junaid akhtar — Wed, 05 Dec 2007 15:50:06 GMT

we ahve rx3600 with 2 duecore cpu.How can we cheack that both cpu are being used by the system

Re: cpu usage in rx 3600

Michael Moroney — Wed, 05 Dec 2007 16:49:31 GMT

From DCL you can do $ SHOW CPU and get something like this:

$ sh cpu

System: STARDV, HP rx3600 (1.59GHz/9.0MB)

CPU ownership sets:
Active 0-3
Configure 0-3

CPU state sets:
Potential 0-3
Autostart 0-3
Powered Down None
Not Present None
Failover None
$

This shows that all four CPUs are available.

Also do $ SHOW SYSTEM when the system is loaded and look for processes in the CUR state. The number after the CUR is the CPU the process is running on. After a few SHOW SYSTEMS you should see CPUs 0-3 being used. Create several CPU-bound processes if you really want to see all in use at once.

Re: cpu usage in rx 3600

Jim_McKinney — Wed, 05 Dec 2007 19:11:08 GMT

$ monitor modes/cpu=(0,1)

topic cpu usage in rx 3600 in Operating System - OpenVMS

cpu usage in rx 3600

Re: cpu usage in rx 3600

Re: cpu usage in rx 3600