topic Re: GS160 partition issue in Operating System - OpenVMS

GS160 partition issue

bennyb — Mon, 14 Apr 2008 20:10:15 GMT

We have a GS160 that when powered on has problems with the HP_COUNT settings. Normally when I set a GS160 to HP_COUNT 0 and all of the QBB masks to 0. I should get this

system = QBB 0 1 + HS
QBB 0 = CPU 0 + Mem 0 + Dir + IOP + PCA 0 1 + GP (Hard QBB 0)
QBB 1 = CPU 0 + Mem + Dir + IOP + PCA + GP (Hard QBB 1)

instead I am getting this output:

system = QBB 0 1 + HS
QBB 0 = CPU 0 + Mem 0 + Dir + IOP + PCA 0 1 + GP (Hard QBB 0)
QBB 1 = CPU 0 + Mem + Dir + IOP + PCA + GP (Hard QBB 5)

any ideas why I can not get qbb1 to show up as hard partition 1 when I have the HP_COUNT set to 0?

regards,

Bennyb

Re: GS160 partition issue

marsh_1 — Tue, 15 Apr 2008 14:38:20 GMT

have you checked which ports on the hsm they are plugged in to, could be logical qbb0 in gp0 hard qbb0 and logical qbb1 in gp5 hard qbb5

Re: GS160 partition issue

bennyb — Wed, 16 Apr 2008 16:02:50 GMT

We have, they are connected to the correct ports on the H-Switch.

Bennyb