https://community.hpe.com/t5/operating-system-openvms/debug-a-subprocess/m-p/3714863#M8979 It should still work. What happens now? Mon, 23 Jan 2006 06:07:29 GMT Ian Miller. 2006-01-23T06:07:29Z https://community.hpe.com/t5/operating-system-openvms/debug-a-subprocess/m-p/3714862#M8978 I'm using OpenVMS 7.3-2, code is written in Fortran. Prior to this version, it was possible in the debugger to debug a subprocess at the point where the subprocess is starting by typing SET BREAK/ACTIVATING. This no longer works the way it used to. Can anyone tell me how I should do this now. Thanks. Sun, 22 Jan 2006 18:28:24 GMT https://community.hpe.com/t5/operating-system-openvms/debug-a-subprocess/m-p/3714862#M8978 Rowan Wood 2006-01-22T18:28:24Z https://community.hpe.com/t5/operating-system-openvms/debug-a-subprocess/m-p/3714863#M8979 It should still work. What happens now? Mon, 23 Jan 2006 06:07:29 GMT https://community.hpe.com/t5/operating-system-openvms/debug-a-subprocess/m-p/3714863#M8979 Ian Miller. 2006-01-23T06:07:29Z https://community.hpe.com/t5/operating-system-openvms/debug-a-subprocess/m-p/3714864#M8980 I never see the subprocess. These are the commands as I typed them in:<BR /><BR />debug/keep<BR />conn <PARENT process=""><BR />set proc <PARENT process=""><BR />set bre/act<BR />go<BR /><BR />I then trigger the event which starts the subprocess but nothing happens in the debugger. Subprocess has been linked with debug.</PARENT></PARENT> Mon, 23 Jan 2006 09:09:47 GMT https://community.hpe.com/t5/operating-system-openvms/debug-a-subprocess/m-p/3714864#M8980 Rowan Wood 2006-01-23T09:09:47Z