topic Re: Error accessing routes DataBase in Operating System - OpenVMS https://community.hpe.com/t5/operating-system-openvms/error-accessing-routes-database/m-p/4296975#M91636 While I would most definitely not rule out a random and (usually) isolated disk data file corruption that was triggered by a weirdness within TCP/IP Services itself, do also check for disk and hardware errors.<BR /><BR />And as usual, load up the current ECO kits as these are known to remediate all manner of weirdnesses elsewhere in the application environment. Fri, 31 Oct 2008 14:20:45 GMT Hoff 2008-10-31T14:20:45Z Error accessing routes DataBase https://community.hpe.com/t5/operating-system-openvms/error-accessing-routes-database/m-p/4296968#M91629 <BR />Good morning all,<BR />I'm in trouble with an RX3600 with OpenVMS 8.3-1H1. I can't access ANYMORE to routes database.<BR /><BR />Each time I performt SHO ROUTE in TCPIP enviroment I got:<BR /><BR />%TCPIP-E-ROUTEERROR, error accessing routes database (TCPIP$ROUTE)<BR /><BR />Please help, I'm driving crazy, because till last week all working fine. I reboot the two nodes in cluster, but still not work... What's happen ??<BR /><BR />Thanks!<BR /> Thu, 30 Oct 2008 08:40:13 GMT https://community.hpe.com/t5/operating-system-openvms/error-accessing-routes-database/m-p/4296968#M91629 smsc_1 2008-10-30T08:40:13Z Re: Error accessing routes DataBase https://community.hpe.com/t5/operating-system-openvms/error-accessing-routes-database/m-p/4296969#M91630 Hi smsc<BR /><BR />Does the route databse exist? (Dir tcpip$route)<BR />How is the protection of tcpip$route ?<BR />Is there an additional error message ?<BR /><BR />Regards<BR /><BR />Geni Thu, 30 Oct 2008 09:21:15 GMT https://community.hpe.com/t5/operating-system-openvms/error-accessing-routes-database/m-p/4296969#M91630 Heinz W Genhart 2008-10-30T09:21:15Z Re: Error accessing routes DataBase https://community.hpe.com/t5/operating-system-openvms/error-accessing-routes-database/m-p/4296970#M91631 <BR />Ok I report more information.<BR />First of all I got the error message when I Issue SHOW ROUTE command.<BR /><BR />But if first I use:<BR /><BR />SHOW ROUTE /PERM = it works<BR /><BR />then<BR /><BR />SHOW ROUTE = it works<BR /><BR />So, first I need to show permanent route, then I can see static route, very very strange!!!!!<BR /><BR />This is the log from following command:<BR /><BR />SHOW ROUTE = Error<BR />SHOW ROUTE/PERM = OK<BR />SHO ROUTE = OK<BR /><BR />TCPIP&gt; sho route<BR />%XQP, Thread #0, FIB contents:<BR /> 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000<BR /> 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000<BR /> 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000<BR />%XQP, Thread #0, FIB contents:<BR /> 00000000 0003236F 00000000 00000000 00000000 00000000 00000000 00000000<BR /> 00000000 00000000 00000000 00000000 00000000 00000001 00000000 00000000<BR /> 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000<BR />%XQP, Thread #0, Lookup (9071,3,0) Status: 00000001<BR />%XQP, Thread #0, FIB contents:<BR /> 00000000 0003236F 00000000 00000000 00000000 00000003 00000000 00000000<BR /> 00000000 00000000 00000000 01030000 00000000 00000000 00000000 00000000<BR /> 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000101<BR />%XQP, Thread #0, FIB contents:<BR /> 00000000 0003236F 00000000 00000000 00000000 00000003 00000000 00000000<BR /> 00000000 00000000 00000000 01030000 00000000 00000001 00000000 00000000<BR /> 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000101<BR />%XQP, Thread #0, Volume protection: Access requested: 00000001, Status: 00000001, PrvUsd: 00000000<BR />%XQP, Thread #0, File protection (9071,3,0): Access requested: 00000001, Status: 00000001, PrvUsd: 00000000<BR />%XQP, Thread #0, Read attributes: Access mode TCPIP$IPC_SHR.EXE;1 (9071,3,0)<BR />%XQP, Thread #0, Read attributes: Access mode TCPIP$IPC_SHR.EXE;1 (9071,3,0)<BR />%XQP, Thread #0, Read attributes: Journal flags TCPIP$IPC_SHR.EXE;1 (9071,3,0)<BR />%XQP, Thread #0, Read attributes: RU active TCPIP$IPC_SHR.EXE;1 (9071,3,0)<BR />%XQP, Thread #0, Read attributes: Statistics block TCPIP$IPC_SHR.EXE;1 (9071,3,0)<BR />%XQP, Thread #0, Read attributes: Find ACE by type TCPIP$IPC_SHR.EXE;1 (9071,3,0)<BR />%XQP, Thread #0, Read attributes: Record attributes TCPIP$IPC_SHR.EXE;1 (9071,3,0)<BR />%XQP, Thread #0, Read attributes: User file characteristics TCPIP$IPC_SHR.EXE;1 (9071,3,0)<BR />%XQP, Thread #0, Read attributes: File length hint field TCPIP$IPC_SHR.EXE;1 (9071,3,0)<BR />%XQP, Thread #0, Access TCPIP$IPC_SHR.EXE;1 (9071,3,0) Status: 00000001<BR />%XQP, Thread #0, FIB contents:<BR /> 00000000 0003236F 00000000 00000000 00000000 00220003 00000120 00000000<BR /> 00000000 00000000 00000000 01030000 00000000 000009D0 00000000 00000000<BR /> 00000000 00000000 00000000 00000000 00000120 00000000 00000000 00000101<BR />%XQP, Thread #0, FIB contents:<BR /> 00000000 0003236F 00000000 00000000 00000000 00220003 00000120 00000000<BR /> 00000000 00000000 00000000 01030000 00000000 00000001 00000000 00000000<BR /> 00000000 00000000 00000000 00000000 00000120 00000000 00000000 00000101<BR />%XQP, Thread #0, Control function (9071,3,0) Status: 00000001<BR />%XQP, Thread #0, FIB contents:<BR /> 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000<BR /> 00000000 00000000 00000000 00030000 00000000 00000000 00000000 00000000<BR /> 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000<BR />%XQP, Thread #0, FIB contents:<BR /> 00000000 0003236F 00000000 00000000 00000000 00000000 00000000 00000000<BR /> 00000000 00000000 00000000 00030000 00000000 00000001 00000000 00000000<BR /> 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000<BR />%XQP, Thread #0, Deaccess (9071,3,0) Reads: 4, Writes: 0, Status: 00000001<BR />%TCPIP-E-ROUTEERROR, error accessing routes database (TCPIP$ROUTE)<BR /><BR /><BR /><BR /><BR /><BR /><BR /><BR /><BR /><BR /><BR /><BR /><BR /><BR />TCPIP&gt; sho route /perm<BR />%XQP, Thread #0, FIB contents:<BR /> 00040000 00000000 00130000 00000001 00000000 00000003 00000000 00000000<BR /> 00000000 00000000 00000000 01030000 00000000 00000000 00000000 00000000<BR /> 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000101<BR />%XQP, Thread #0, FIB contents:<BR /> 00040000 00000000 00130000 00000001 00000000 00000003 00000000 00000000<BR /> 00000000 00000000 00000000 01030000 00000000 00000001 00000000 00000000<BR /> 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000101<BR />%XQP, Thread #0, Volume protection: Access requested: 00000001, Status: 00000001, PrvUsd: 00000000<BR />%XQP, Thread #0, File protection (19,1,0): Access requested: 00000004, Status: 00000001, PrvUsd: 00000000<BR />%XQP, Thread #0, Read only directory access (19,1,0)<BR />%XQP, Thread #0, Directory scan for: TCPIP$ROUTE.DAT;1, Status: 00000001<BR />%XQP, Thread #0, File protection (22617,15,0): Access requested: 00000001, Status: 00000001, PrvUsd: 00000000<BR />%XQP, Thread #0, Read attributes: Access mode TCPIP$ROUTE.DAT;1 (22617,15,0)<BR />%XQP, Thread #0, Read attributes: Access mode TCPIP$ROUTE.DAT;1 (22617,15,0)<BR />%XQP, Thread #0, Read attributes: Journal flags TCPIP$ROUTE.DAT;1 (22617,15,0)<BR />%XQP, Thread #0, Read attributes: RU active TCPIP$ROUTE.DAT;1 (22617,15,0)<BR />%XQP, Thread #0, Read attributes: Statistics block TCPIP$ROUTE.DAT;1 (22617,15,0)<BR />%XQP, Thread #0, Read attributes: Find ACE by type TCPIP$ROUTE.DAT;1 (22617,15,0)<BR />%XQP, Thread #0, Read attributes: Record attributes TCPIP$ROUTE.DAT;1 (22617,15,0)<BR />%XQP, Thread #0, Read attributes: User file characteristics TCPIP$ROUTE.DAT;1 (22617,15,0)<BR />%XQP, Thread #0, Read attributes: File length hint field TCPIP$ROUTE.DAT;1 (22617,15,0)<BR />%XQP, Thread #0, Access TCPIP$ROUTE.DAT;1 (22617,15,0) Status: 00000001<BR />%XQP, Thread #0, FIB contents:<BR /> 00040000 00000000 00130000 00000001 00000000 00000003 00000000 00000000<BR /> 00000000 00000000 00000000 01030000 00000000 00000000 00000000 00000000<BR /> 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000101<BR />%XQP, Thread #0, FIB contents:<BR /> 00040000 00000000 00130000 00000001 00000000 00000003 00000000 00000000<BR /> 00000000 00000000 00000000 01030000 00000000 00000001 00000000 00000000<BR /> 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000101<BR />%XQP, Thread #0, Volume protection: Access requested: 00000001, Status: 00000001, PrvUsd: 00000000<BR />%XQP, Thread #0, File protection (19,1,0): Access requested: 00000004, Status: 00000001, PrvUsd: 00000000<BR />%XQP, Thread #0, Read only directory access (19,1,0)<BR />%XQP, Thread #0, Directory scan for: TCPIP$HOST.DAT;1, Status: 00000001<BR />%XQP, Thread #0, File protection (22669,544,0): Access requested: 00000001, Status: 00000001, PrvUsd: 00000000<BR />%XQP, Thread #0, Read attributes: Access mode TCPIP$HOST.DAT;1 (22669,544,0)<BR />%XQP, Thread #0, Read attributes: Access mode TCPIP$HOST.DAT;1 (22669,544,0)<BR />%XQP, Thread #0, Read attributes: Journal flags TCPIP$HOST.DAT;1 (22669,544,0)<BR />%XQP, Thread #0, Read attributes: RU active TCPIP$HOST.DAT;1 (22669,544,0)<BR />%XQP, Thread #0, Read attributes: Statistics block TCPIP$HOST.DAT;1 (22669,544,0)<BR />%XQP, Thread #0, Read attributes: Find ACE by type TCPIP$HOST.DAT;1 (22669,544,0)<BR />%XQP, Thread #0, Read attributes: Record attributes TCPIP$HOST.DAT;1 (22669,544,0)<BR />%XQP, Thread #0, Read attributes: User file characteristics TCPIP$HOST.DAT;1 (22669,544,0)<BR />%XQP, Thread #0, Read attributes: File length hint field TCPIP$HOST.DAT;1 (22669,544,0)<BR />%XQP, Thread #0, Access TCPIP$HOST.DAT;1 (22669,544,0) Status: 00000001<BR />%XQP, Thread #0, FIB contents:<BR /> 00040000 00000000 00130000 00000001 00000000 00000003 00000000 00000000<BR /> 00000000 00000000 00000000 01030000 00000000 00000000 00000000 00000000<BR /> 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000101<BR />%XQP, Thread #0, FIB contents:<BR /> 00040000 00000000 00130000 00000001 00000000 00000003 00000000 00000000<BR /> 00000000 00000000 00000000 01030000 00000000 00000001 00000000 00000000<BR /> 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000101<BR />%XQP, Thread #0, Volume protection: Access requested: 00000001, Status: 00000001, PrvUsd: 00000000<BR />%XQP, Thread #0, File protection (19,1,0): Access requested: 00000004, Status: 00000001, PrvUsd: 00000000<BR />%XQP, Thread #0, Read only directory access (19,1,0)<BR />%XQP, Thread #0, Directory scan for: TCPIP$NETWORK.DAT;1, Status: 00000001<BR />%XQP, Thread #0, File protection (9893,9,0): Access requested: 00000001, Status: 00000001, PrvUsd: 00000000<BR />%XQP, Thread #0, Read attributes: Access mode TCPIP$NETWORK.DAT;1 (9893,9,0)<BR />%XQP, Thread #0, Read attributes: Access mode TCPIP$NETWORK.DAT;1 (9893,9,0)<BR />%XQP, Thread #0, Read attributes: Journal flags TCPIP$NETWORK.DAT;1 (9893,9,0)<BR />%XQP, Thread #0, Read attributes: RU active TCPIP$NETWORK.DAT;1 (9893,9,0)<BR />%XQP, Thread #0, Read attributes: Statistics block TCPIP$NETWORK.DAT;1 (9893,9,0)<BR />%XQP, Thread #0, Read attributes: Find ACE by type TCPIP$NETWORK.DAT;1 (9893,9,0)<BR />%XQP, Thread #0, Read attributes: Record attributes TCPIP$NETWORK.DAT;1 (9893,9,0)<BR />%XQP, Thread #0, Read attributes: User file characteristics TCPIP$NETWORK.DAT;1 (9893,9,0)<BR />%XQP, Thread #0, Read attributes: File length hint field TCPIP$NETWORK.DAT;1 (9893,9,0)<BR />%XQP, Thread #0, Access TCPIP$NETWORK.DAT;1 (9893,9,0) Status: 00000001<BR /> <BR /> PERMANENT<BR /> <BR />Type Destination Gateway<BR /> <BR />PH 10.176.98.197 10.176.98.131<BR />%XQP, Thread #0, FIB contents:<BR /> 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000<BR /> 00000000 00000000 00000000 00030000 00000000 00000000 00000000 00000000<BR /> 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000<BR />%XQP, Thread #0, FIB contents:<BR /> 00000000 0220588D 00000000 00000000 00000000 00000000 00000000 00000000<BR /> 00000000 00000000 00000000 00030000 00000000 00000001 00000000 00000000<BR /> 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000<BR />%XQP, Thread #0, Deaccess (22669,544,0) Reads: 2, Writes: 0, Status: 00000001<BR />%XQP, Thread #0, FIB contents:<BR /> 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000<BR /> 00000000 00000000 00000000 00030000 00000000 00000000 00000000 00000000<BR /> 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000<BR />%XQP, Thread #0, FIB contents:<BR /> 00000000 000926A5 00000000 00000000 00000000 00000000 00000000 00000000<BR /> 00000000 00000000 00000000 00030000 00000000 00000001 00000000 00000000<BR /> 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000<BR />%XQP, Thread #0, Deaccess (9893,9,0) Reads: 2, Writes: 0, Status: 00000001<BR />%XQP, Thread #0, FIB contents:<BR /> 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000<BR /> 00000000 00000000 00000000 00030000 00000000 00000000 00000000 00000000<BR /> 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000<BR />%XQP, Thread #0, FIB contents:<BR /> 00000000 000F5859 00000000 00000000 00000000 00000000 00000000 00000000<BR /> 00000000 00000000 00000000 00030000 00000000 00000001 00000000 00000000<BR /> 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000<BR />%XQP, Thread #0, Deaccess (22617,15,0) Reads: 4, Writes: 0, Status: 00000001<BR /><BR /><BR /><BR /><BR /><BR /><BR /><BR /><BR /><BR /><BR /><BR /><BR /><BR /><BR /><BR /><BR /><BR />TCPIP&gt; sho route <BR />%XQP, Thread #0, FIB contents:<BR /> 00040000 00000000 00130000 00000001 00000000 00000003 00000000 00000000<BR /> 00000000 00000000 00000000 01030000 00000000 00000000 00000000 00000000<BR /> 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000101<BR />%XQP, Thread #0, FIB contents:<BR /> 00040000 00000000 00130000 00000001 00000000 00000003 00000000 00000000<BR /> 00000000 00000000 00000000 01030000 00000000 00000001 00000000 00000000<BR /> 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000101<BR />%XQP, Thread #0, Volume protection: Access requested: 00000001, Status: 00000001, PrvUsd: 00000000<BR />%XQP, Thread #0, File protection (19,1,0): Access requested: 00000004, Status: 00000001, PrvUsd: 00000000<BR />%XQP, Thread #0, Read only directory access (19,1,0)<BR />%XQP, Thread #0, Directory scan for: TCPIP$HOST.DAT;1, Status: 00000001<BR />%XQP, Thread #0, File protection (22669,544,0): Access requested: 00000001, Status: 00000001, PrvUsd: 00000000<BR />%XQP, Thread #0, Read attributes: Access mode TCPIP$HOST.DAT;1 (22669,544,0)<BR />%XQP, Thread #0, Read attributes: Access mode TCPIP$HOST.DAT;1 (22669,544,0)<BR />%XQP, Thread #0, Read attributes: Journal flags TCPIP$HOST.DAT;1 (22669,544,0)<BR />%XQP, Thread #0, Read attributes: RU active TCPIP$HOST.DAT;1 (22669,544,0)<BR />%XQP, Thread #0, Read attributes: Statistics block TCPIP$HOST.DAT;1 (22669,544,0)<BR />%XQP, Thread #0, Read attributes: Find ACE by type TCPIP$HOST.DAT;1 (22669,544,0)<BR />%XQP, Thread #0, Read attributes: Record attributes TCPIP$HOST.DAT;1 (22669,544,0)<BR />%XQP, Thread #0, Read attributes: User file characteristics TCPIP$HOST.DAT;1 (22669,544,0)<BR />%XQP, Thread #0, Read attributes: File length hint field TCPIP$HOST.DAT;1 (22669,544,0)<BR />%XQP, Thread #0, Access TCPIP$HOST.DAT;1 (22669,544,0) Status: 00000001<BR />%XQP, Thread #0, FIB contents:<BR /> 00040000 00000000 00130000 00000001 00000000 00000003 00000000 00000000<BR /> 00000000 00000000 00000000 01030000 00000000 00000000 00000000 00000000<BR /> 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000101<BR />%XQP, Thread #0, FIB contents:<BR /> 00040000 00000000 00130000 00000001 00000000 00000003 00000000 00000000<BR /> 00000000 00000000 00000000 01030000 00000000 00000001 00000000 00000000<BR /> 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000101<BR />%XQP, Thread #0, Volume protection: Access requested: 00000001, Status: 00000001, PrvUsd: 00000000<BR />%XQP, Thread #0, File protection (19,1,0): Access requested: 00000004, Status: 00000001, PrvUsd: 00000000<BR />%XQP, Thread #0, Read only directory access (19,1,0)<BR />%XQP, Thread #0, Directory scan for: TCPIP$NETWORK.DAT;1, Status: 00000001<BR />%XQP, Thread #0, File protection (9893,9,0): Access requested: 00000001, Status: 00000001, PrvUsd: 00000000<BR />%XQP, Thread #0, Read attributes: Access mode TCPIP$NETWORK.DAT;1 (9893,9,0)<BR />%XQP, Thread #0, Read attributes: Access mode TCPIP$NETWORK.DAT;1 (9893,9,0)<BR />%XQP, Thread #0, Read attributes: Journal flags TCPIP$NETWORK.DAT;1 (9893,9,0)<BR />%XQP, Thread #0, Read attributes: RU active TCPIP$NETWORK.DAT;1 (9893,9,0)<BR />%XQP, Thread #0, Read attributes: Statistics block TCPIP$NETWORK.DAT;1 (9893,9,0)<BR />%XQP, Thread #0, Read attributes: Find ACE by type TCPIP$NETWORK.DAT;1 (9893,9,0)<BR />%XQP, Thread #0, Read attributes: Record attributes TCPIP$NETWORK.DAT;1 (9893,9,0)<BR />%XQP, Thread #0, Read attributes: User file characteristics TCPIP$NETWORK.DAT;1 (9893,9,0)<BR />%XQP, Thread #0, Read attributes: File length hint field TCPIP$NETWORK.DAT;1 (9893,9,0)<BR />%XQP, Thread #0, Access TCPIP$NETWORK.DAT;1 (9893,9,0) Status: 00000001<BR /> <BR /> DYNAMIC<BR /> <BR />Type Destination Gateway<BR /> <BR />AN 0.0.0.0 10.97.2.140<BR />AN 10.0.0.0/24 10.0.0.1<BR />AH 10.0.0.1 10.0.0.1<BR />AN 10.0.1.0/24 10.0.1.1<BR />AH 10.0.1.1 10.0.1.1<BR />AN 10.97.2.128/28 10.97.2.129<BR />AH 10.97.2.129 10.97.2.129<BR />AN 10.97.2.144/28 10.97.2.145<BR />AH 10.97.2.145 10.97.2.145<BR />AH 10.176.64.193 10.176.66.131<BR />AH 10.176.64.197 10.176.66.131<BR />AN 10.176.66.128/29 10.176.66.129<BR />AH 10.176.66.129 10.176.66.129<BR />AH 10.176.66.193 10.176.66.131<BR />AH 10.176.66.197 10.176.66.131<BR />AH 10.176.74.193 10.176.66.131<BR />AH 10.176.74.197 10.176.66.131<BR />AH 10.176.80.193 10.176.66.131<BR />AH 10.176.80.197 10.176.66.131<BR />AH 10.176.82.193 10.176.66.131<BR />AH 10.176.82.197 10.176.66.131<BR />AH 10.176.84.193 10.176.66.131<BR />AH 10.176.84.197 10.176.66.131<BR />AH 10.176.96.193 10.176.98.131<BR />AH 10.176.96.197 10.176.98.131<BR />AN 10.176.98.128/29 10.176.98.129<BR />AH 10.176.98.129 10.176.98.129<BR />AH 10.176.98.193 10.176.98.131<BR />AH 10.176.98.197 10.176.98.131<BR />AH 10.176.106.193 10.176.98.131<BR />AH 10.176.106.197 10.176.98.131<BR />AH 10.176.112.193 10.176.98.131<BR />AH 10.176.112.197 10.176.98.131<BR />AH 10.176.114.193 10.176.98.131<BR />AH 10.176.114.197 10.176.98.131<BR />AH 10.176.116.193 10.176.98.131<BR />AH 10.176.116.197 10.176.98.131<BR />AN 10.224.137.0/24 10.97.2.154<BR />AN 10.224.179.0/24 10.97.2.140<BR />AH 127.0.0.1 127.0.0.1<BR />%XQP, Thread #0, FIB contents:<BR /> 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000<BR /> 00000000 00000000 00000000 00030000 00000000 00000000 00000000 00000000<BR /> 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000<BR />%XQP, Thread #0, FIB contents:<BR /> 00000000 0220588D 00000000 00000000 00000000 00000000 00000000 00000000<BR /> 00000000 00000000 00000000 00030000 00000000 00000001 00000000 00000000<BR /> 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000<BR />%XQP, Thread #0, Deaccess (22669,544,0) Reads: 2, Writes: 0, Status: 00000001<BR />%XQP, Thread #0, FIB contents:<BR /> 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000<BR /> 00000000 00000000 00000000 00030000 00000000 00000000 00000000 00000000<BR /> 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000<BR />%XQP, Thread #0, FIB contents:<BR /> 00000000 000926A5 00000000 00000000 00000000 00000000 00000000 00000000<BR /> 00000000 00000000 00000000 00030000 00000000 00000001 00000000 00000000<BR /> 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000<BR />%XQP, Thread #0, Deaccess (9893,9,0) Reads: 2, Writes: 0, Status: 00000001<BR /><BR /><BR /><BR /><BR /><BR /><BR /> Thu, 30 Oct 2008 09:23:15 GMT https://community.hpe.com/t5/operating-system-openvms/error-accessing-routes-database/m-p/4296970#M91631 smsc_1 2008-10-30T09:23:15Z Re: Error accessing routes DataBase https://community.hpe.com/t5/operating-system-openvms/error-accessing-routes-database/m-p/4296971#M91632 <BR />Ops! thanks for reply Heinz, I see your post after mine.<BR /><BR />As reported all ROUTE are configured and working till last week, I don't know what happen on the system during last days....<BR /><BR />Btw, TCPIP$ROUTE still exists, I just delete it this morning and created a new one just for try:<BR /><BR />SE71:SYSTEM&gt; dir TCPIP$ROUTE.DAT /date /size /prot<BR /><BR />TCPIP$ROUTE.DAT;1 112 30-OCT-2008 10:54:53.81 (RWED,RWED,RE,RE)<BR /> Thu, 30 Oct 2008 09:29:41 GMT https://community.hpe.com/t5/operating-system-openvms/error-accessing-routes-database/m-p/4296971#M91632 smsc_1 2008-10-30T09:29:41Z Re: Error accessing routes DataBase https://community.hpe.com/t5/operating-system-openvms/error-accessing-routes-database/m-p/4296972#M91633 smsc,<BR /><BR /> do you have tcpip$inet_host defined ? Thu, 30 Oct 2008 20:46:53 GMT https://community.hpe.com/t5/operating-system-openvms/error-accessing-routes-database/m-p/4296972#M91633 marsh_1 2008-10-30T20:46:53Z Re: Error accessing routes DataBase https://community.hpe.com/t5/operating-system-openvms/error-accessing-routes-database/m-p/4296973#M91634 smsc,<BR /><BR /> or tcpip$inet_domain , can't remember which of these missing can cause this ! :-) Thu, 30 Oct 2008 22:06:21 GMT https://community.hpe.com/t5/operating-system-openvms/error-accessing-routes-database/m-p/4296973#M91634 marsh_1 2008-10-30T22:06:21Z Re: Error accessing routes DataBase https://community.hpe.com/t5/operating-system-openvms/error-accessing-routes-database/m-p/4296974#M91635 <BR />No way....<BR />Seems TCPIP$ROUTE and TCPIP$HOST files are corrupted for unknown reason.<BR /><BR />I deleted it and created a new one (need again to reconfigure all routes/hosts)...<BR /><BR />Now it works again....<BR /> Fri, 31 Oct 2008 13:28:22 GMT https://community.hpe.com/t5/operating-system-openvms/error-accessing-routes-database/m-p/4296974#M91635 smsc_1 2008-10-31T13:28:22Z Re: Error accessing routes DataBase https://community.hpe.com/t5/operating-system-openvms/error-accessing-routes-database/m-p/4296975#M91636 While I would most definitely not rule out a random and (usually) isolated disk data file corruption that was triggered by a weirdness within TCP/IP Services itself, do also check for disk and hardware errors.<BR /><BR />And as usual, load up the current ECO kits as these are known to remediate all manner of weirdnesses elsewhere in the application environment. Fri, 31 Oct 2008 14:20:45 GMT https://community.hpe.com/t5/operating-system-openvms/error-accessing-routes-database/m-p/4296975#M91636 Hoff 2008-10-31T14:20:45Z Re: Error accessing routes DataBase https://community.hpe.com/t5/operating-system-openvms/error-accessing-routes-database/m-p/4296976#M91637 smsc,<BR /><BR /> you should at least have the tcpip$inet_host logical name defined at tcpip startup which will be the host name and would match an entry in the host table. Fri, 31 Oct 2008 14:24:07 GMT https://community.hpe.com/t5/operating-system-openvms/error-accessing-routes-database/m-p/4296976#M91637 marsh_1 2008-10-31T14:24:07Z