topic Issue with Decnet in Operating System - OpenVMS

Issue with Decnet

Mulder_1 — Tue, 11 Nov 2008 11:51:16 GMT

I have an issue with the nodes in a cluster :
when I do "set host " to server A from server B,itlogs me into C.
When I do a set host from C to A again, it logs me correctly.

The servers are running on DECnet only.
When I ran decnet_register, it shows the node names correctly

Can anyone please suggest ?

Thanks

Re: Issue with Decnet

marsh_1 — Tue, 11 Nov 2008 12:14:40 GMT

fox2,

have you checked the actual decnet addresses against the names on each of the servers ?

Re: Issue with Decnet

Heinz W Genhart — Tue, 11 Nov 2008 13:21:24 GMT

Hi Fox2

You tell the information within DECNET_REGISTER is as excpected.
Did you flush the naming cache?

try:
MC NCL FLUSH SESSION CONTROL NAMING CACHE ENTRY "*"
and then retry the SET HOST

Hope that helps

Regards

Geni

Re: Issue with Decnet

Mulder_1 — Tue, 11 Nov 2008 13:51:35 GMT

AXP$:> MC NCL FLUSH SESSION CONTROL NAMING CACHE ENTRY

Node 0 Session Control
at 2008-11-11-13:46:57.768+00:00I18.082

command failed due to:
process failure

This is what I get...

I already ran net$configure basic and it reviewed that it did flush the name cache entries.

Thanks

Re: Issue with Decnet

Heinz W Genhart — Tue, 11 Nov 2008 16:09:51 GMT

Hi Fox2

The Command is

MC NCL FLUSH SESSION CONTROL NAMING CACHE ENTRY "*"

As far as I see you forgot to enter the "*"

Hope this works

Regards

Geni