topic Re: Cluster Interconnects in Operating System - OpenVMS

Cluster Interconnects

Joewee — Thu, 19 Mar 2009 14:40:29 GMT

Hi All,

We have a Alpha machine and 2 HSJ50 connected together with cluster interconnects.

How to check that in which way they are connected like whether using CI connection or FDDI connection on Memory channel inter connect and so on.

Joe

Re: Cluster Interconnects

Joewee — Thu, 19 Mar 2009 15:06:42 GMT

I got it.. sorry for the trouble..

Sho clus/cont

> add rp_type

Joe.

Re: Cluster Interconnects

Jess Goodman — Thu, 19 Mar 2009 17:06:52 GMT

You can also use the SCACP utility if you are running VMS 7.3 or later.
$ MCR SCACP
SHOW PORT
SHOW CIRCUIT
SHOW CHANNEL
SHOW VC
SHOW LAN_DEVICE

Re: Cluster Interconnects

Joewee — Thu, 19 Mar 2009 17:13:01 GMT

Thanks for your reply Jess.

But the version is V7.1-1H1 :(. Any ways I have got all the requied information.

Thanks :)

Re: Cluster Interconnects

Wim Van den Wyngaert — Mon, 23 Mar 2009 09:38:09 GMT

But note that your version is vague.
I have an FDDI cluster (private fiber). It shows LAN for rp_type.

I use ana/sys show lan.
Then check the output for lines with client "SCA". This indicates that the cluster protocol is on that interface.

Wim