topic Re: Replace Existing File with Temp File:ICMP port unreachable 226 Transfer complete. in Operating System - OpenVMS

Replace Existing File with Temp File:ICMP port unreachable 226 Transfer complete.

shiva27 — Thu, 04 Jun 2009 06:00:44 GMT

Hi All,

Openvms - V8.3
I want to download SYS$ERRORLOG:ERRLOG.SYS file from VMS server to local desktop thru FTP.
So i took the backup of this file on same directory with another name and tried it ftp as
ftp A.B.C.D (ip addres)
username:xyz pass:***
ftp>bin
ftp>hash
ftp>prompt
ftp>cd "SYS$ERRORLOG"
ftp>mget ERRLOG.SYS
....................
....................
Replace Existing File with Temp File:ICMP port unreachable 226 Transfer complete.

Any idea why this error is coming , other logs files are able to download successfully from same server.

Re: Replace Existing File with Temp File:ICMP port unreachable 226 Transfer complete.

shiva27 — Thu, 04 Jun 2009 06:02:37 GMT

Forgot to add,

When i check on desktop no files downloaded.

Re: Replace Existing File with Temp File:ICMP port unreachable 226 Transfer complete.

Wim Van den Wyngaert — Thu, 04 Jun 2009 06:08:28 GMT

ICMP port unreachable would mean that VMS replied that you could not open the transport port (you obvious have the command port active as it prompted for the username).

A firewall blocking certain ports could also send this.

Wim

Re: Replace Existing File with Temp File:ICMP port unreachable 226 Transfer complete.

shiva27 — Thu, 04 Jun 2009 06:31:26 GMT

Understood , but again how can i able to pulled other logs files from same server, only these file encountering error,
this file size is 130MB.

Is there any other way to download this file on desktop, i want to send this file urgently to HP for analyzing critical issues.

Re: Replace Existing File with Temp File:ICMP port unreachable 226 Transfer complete.

marsh_1 — Thu, 04 Jun 2009 06:50:24 GMT

hi,

if there is only one why don't you just use get not mget, back it up to another area first and get it from there.

fwiw

Re: Replace Existing File with Temp File:ICMP port unreachable 226 Transfer complete.

Wim Van den Wyngaert — Thu, 04 Jun 2009 06:54:42 GMT

I tried the same commands from my XP with a old FTP program (which I shouldn't have) to VMS 7.3. Mget doesn't work but get works fine.

Try ftp command "debug", ftp command "set passive on" (or whatever in your ftp).

Wim

Re: Replace Existing File with Temp File:ICMP port unreachable 226 Transfer complete.

shiva27 — Thu, 04 Jun 2009 07:16:42 GMT

Thx Mark , It's done with get option.