topic Re: Device not being dismounted in Operating System - OpenVMS

Device not being dismounted

Swain — Thu, 16 Jul 2009 12:56:38 GMT

$ dismount ALPHA$DKB600:
%DISM-W-CANNOTDMT, ALPHA$DKB600: cannot be dismounted
%DISM-W-INSTIMAGE, 5 images installed on volume
$ dismount/over=checks ALPHA$DKB600:
%DISM-I-INSTIMAGE, 5 images installed on volume
%DISM-I-MARKEDDMT, ALPHA$DKB600: has been marked for dismount
$ dismount/over=checks ALPHA$DKB600:
%SYSTEM-F-DEVNOTMOUNT, device is not mounted
$ mount/for ALPHA$DKB600:
%MOUNT-F-DEVMOUNT, device is already mounted

Why is it so, could someone explain?

Thanks,
Amaresh

Re: Device not being dismounted

Mike Kier — Thu, 16 Jul 2009 13:12:41 GMT

$Help Dismount /Override=Checks will give you the answer

Specifically: "Note also that the file system cannot dismount a volume while any known file lists associated with it contain entries."

Until the 5 images are INSTALL REMOVEd, the disk is not fully dismounted.

Re: Device not being dismounted

Rich Hearn — Thu, 16 Jul 2009 13:18:23 GMT

Amaresh,

You should do a "install list" to see what's installed. Also, try doing a "show dev/file Alpha$Dkb600:" to see what that will show you.

You will have to un-install the images to have the disk dismount, but that may not be possible depending on what images are. You may need to shutdown the system.

Rich

Re: Device not being dismounted

Hoff — Thu, 16 Jul 2009 13:22:34 GMT

$ help /message /facility=dism INSTIMAGE

INSTIMAGE, 'n' images installed on volume

Facility: DISM, DISMOUNT Command

Explanation: The specified number of images have been installed on the
volume.

User Action: Use the Install utility's REMOVE or DELETE commands to remove
or delete the installed images.

Re: Device not being dismounted

Swain — Thu, 16 Jul 2009 14:08:24 GMT

Sorry, none did help anyway.

please explain in detail.

Thanks,
Amaresh

Re: Device not being dismounted

H.Becker — Thu, 16 Jul 2009 14:45:41 GMT

>>>
Sorry, none did help anyway.
<<<
None of what?

INSTALL REMOVE/DELETE makes the image unknown to subsequent image activations. Currently running images may have a reference to that (shareable) image. INSTALL REMOVE will only deinstall the image, if it is not referenced. In any other case it is "marked for deinstall". At image rundown there is a check if the reference count for such images became zero. If that's the case then, the image is deinstalled. Then you can dismount the disk.

INSTALL LIST does not list images "marked for deinstall".

Re: Device not being dismounted

Peter Zeiszler — Thu, 16 Jul 2009 15:01:18 GMT

show dev /files ALPHA$DKB600:
install list

Then from that information:
install remove blah blah

Re: Device not being dismounted

Swain — Fri, 17 Jul 2009 03:00:21 GMT

$ show dev /files ALPHA$DKB600:

Files accessed on device ALPHA$DKB600: on 17-JUL-2009 00:04:29.67

Process name PID File name
00000000 [000000]INDEXF.SYS;1
00000000 [RS1R4.BIN]RS1ALL.EXE;2
00000000 [RS1R4.BIN]RS1.EXE;2
00000000 [RS1R4.BIN]RS1SHARE.EXE;2
00000000 [RS1R4.BIN]RS1WS.EXE;2
00000000 [RS1R4.BIN]RS1SERV.EXE;2

if this could help?

Re: Device not being dismounted

Karl Rohwedder — Fri, 17 Jul 2009 03:49:59 GMT

Amaresh,

us ing your data you should try e.g.
$ INSTALL REMOVE ALPHA$DKB600:[RS1R4.BIN]RS1ALL
...

regards Kalle

Re: Device not being dismounted

Swain — Fri, 17 Jul 2009 13:29:11 GMT

The following worked.

show dev /files ALPHA$DKB600:
install list
INSTALL REMOVE

Thanks a lot to all!
Amaresh