https://community.hpe.com/t5/operating-system-openvms/availability-manager-analyzer/m-p/4563262#M97481 This is just a note to let you know of some work that was done for the AM V3.0-2 release. <BR /><BR />Since the Analyzer is pretty much just Java code, and with the advent of the Server, you can try runnng the Analyzer on other platforms than Windows or OpenVMS. Note: This is NOT A SUPPORTED configuration. Do NOT ask HP for support on the following. This information is supplied by myself (as a private individual and no longer an HP employee), and does not represent HP in any way.<BR /><BR />With that out of the way...<BR /><BR />If you take the *.JAR files from the installed kit, and use the $ JAVA command from the AMDS$AM_RUN.COM file (sans the pixmap qualifier), you can run the Analyzer on Linux, etc. I have done this on Linux, and I believe that it should work on other platforms. I did some work to detect if the RMI file is there or not, and adjust. Running on another platform, you can only connect to a server - there is not a protocol driver to connect the Analyzr to a local network adapter.<BR /><BR />Again, this is not a supported configuration, but if you want to try this on your own, I thought I'd share the information.<BR /><BR />Barry<BR /> Wed, 13 Jan 2010 01:33:10 GMT Barry Kierstein II 2010-01-13T01:33:10Z https://community.hpe.com/t5/operating-system-openvms/availability-manager-analyzer/m-p/4563262#M97481 This is just a note to let you know of some work that was done for the AM V3.0-2 release. <BR /><BR />Since the Analyzer is pretty much just Java code, and with the advent of the Server, you can try runnng the Analyzer on other platforms than Windows or OpenVMS. Note: This is NOT A SUPPORTED configuration. Do NOT ask HP for support on the following. This information is supplied by myself (as a private individual and no longer an HP employee), and does not represent HP in any way.<BR /><BR />With that out of the way...<BR /><BR />If you take the *.JAR files from the installed kit, and use the $ JAVA command from the AMDS$AM_RUN.COM file (sans the pixmap qualifier), you can run the Analyzer on Linux, etc. I have done this on Linux, and I believe that it should work on other platforms. I did some work to detect if the RMI file is there or not, and adjust. Running on another platform, you can only connect to a server - there is not a protocol driver to connect the Analyzr to a local network adapter.<BR /><BR />Again, this is not a supported configuration, but if you want to try this on your own, I thought I'd share the information.<BR /><BR />Barry<BR /> Wed, 13 Jan 2010 01:33:10 GMT https://community.hpe.com/t5/operating-system-openvms/availability-manager-analyzer/m-p/4563262#M97481 Barry Kierstein II 2010-01-13T01:33:10Z https://community.hpe.com/t5/operating-system-openvms/availability-manager-analyzer/m-p/4563263#M97482 Barry<BR /><BR />Thanks for sharing this very useful tip!<BR /><BR />regards<BR /><BR />Gerard Wed, 13 Jan 2010 08:35:44 GMT https://community.hpe.com/t5/operating-system-openvms/availability-manager-analyzer/m-p/4563263#M97482 labadie_1 2010-01-13T08:35:44Z