topic Re: Invalid HWRPB Errors in Operating System - OpenVMS

Invalid HWRPB Errors

Swain — Thu, 28 Jan 2010 16:18:55 GMT

We have an Alphaserver 800 5/400 running open vms V6.2-1H3

When I try to boot it, I get

>>>sh boot
Use bootdef_dev instead.
>>>sh bootdef_dev
bootdef_dev dkc0.0.0.13.0
>>>boot dkc0
(boot dkc0.0.0.13.0 -flags 0)
block 0 of dkc0.0.0.13.0 is a valid boot block
reading 1013 blocks from dkc0.0.0.13.0
bootstrap code read in
base = 1d6000, image_start = 0, image_bytes = 7ea00
initializing HWRPB at 2000
initializing page table at 43fce000
initializing machine state
setting affinity to the primary CPU
jumping to bootstrap code
%APB-I-FILENOTLOC, Unable to locate SYSBOOT.EXE
%APB-I-LOADFAIL, Failed to load secondary bootstrap, status = 00000870

halted CPU 0

halt code = 5
HALT instruction executed
PC = 200039dc
warning -- HWRPB is invalid
>>>

I might be wrong, but As per my knowledge, We cannot boot off a VMS 6.2-1H3 CD bcoz it does not have the eco kit.
Should I have any particuler ECO installed on VMS 6.2-1H3 before I boot?

[P.S. I need this system to be DR server for another Alphaserver 1000A 5/400 running v6.2-1H3]

Thanks for your help..

Amaresh

Re: Invalid HWRPB Errors

The Brit — Thu, 28 Jan 2010 16:28:23 GMT

Just a wild suggestion, You could try

P00> boot dkc0 -fl 0,0

Dave

Re: Invalid HWRPB Errors

Volker Halle — Thu, 28 Jan 2010 17:01:40 GMT

Amaresh,

now that you've solved the 'secure console' problem, we're back at the original problem:

A status of 00000870 means: end-of-file.

There seems to be something wrong with SYSBOOT.EXE on that disk.

Did you try to boot from an OpenVMS Operating System CD ? Maybe use a more recent one, if V6.2-1H3 fails...

Volker.

Re: Invalid HWRPB Errors

Hoff — Thu, 28 Jan 2010 17:07:52 GMT

OpenVMS Alpha V7.1 is minimally required for AlphaServer 800. There is no ECO. Upgrade. Or replace the box with a box that runs V6.2-1H3.

http://h71000.www7.hp.com/openvms/hw_supportchart.html

Re: Invalid HWRPB Errors

Andy Bustamante — Thu, 28 Jan 2010 17:30:44 GMT

A used 1000 is very affordable. Or you may consider an emulated system, http://www.stromasys.ch/products/.

Re: Invalid HWRPB Errors

Swain — Fri, 29 Jan 2010 12:15:25 GMT

Hi Volker,

Will there be any inconvenience (in terms of data descrepancy or file systems)if I install v8.3 and make it the DR box for system running v6.2-1H3?

Thanks,
Amaresh

Re: Invalid HWRPB Errors

Volker Halle — Fri, 29 Jan 2010 12:37:30 GMT

Amaresh,

OpenVMS always had a very high goal: upward compatibility !

Going from V6.2-1H3 to V8.3 is a big step. OpenVMS itself should be fine, although you can't upgrade directly and have to do a couple of upgrades inbetween. Or directly install V8.3.

Whether your applications and other layered products do run with V8.3 is something we can't know.

For a DR site, it would probably be wise to use the SAME OpenVMS version as on the primary site ! Just try to get an Alpha, which works with V6.2-1H3. The CHARON-AXP emulators may be a good choice...

Volker.

PS: Disclaimer: we are a CHARON reseller.

Re: Invalid HWRPB Errors

Swain — Fri, 29 Jan 2010 15:51:24 GMT

I am planning to make it v7.2

but, Is there any chance of getting v6.2-1H3 on the Alphaserver 800?

I booted the system from v6.2-1H3 CD and got the following

>>>boot dka400
(boot dka400.4.0.5.0 -flags 0)
block 0 of dka400.4.0.5.0 is a valid boot block
reading 1004 blocks from dka400.4.0.5.0
bootstrap code read in
base = 1d6000, image_start = 0, image_bytes = 7d800
initializing HWRPB at 2000
initializing page table at 43fce000
initializing machine state
setting affinity to the primary CPU
jumping to bootstrap code

OpenVMS (TM) Alpha Operating System, Version V6.2-1H3

Please enter date and time (DD-MMM-YYYY HH:MM)
Please enter date and time (DD-MMM-YYYY HH:MM) 29-JAN-2010 10:49

$! Copyright (c) 1995 Digital Equipment Corporation. All rights reserved.

Installing required known files...

Configuring devices...

[c 7 [255;255H [6n 8 >

****************************************************************

You can install or upgrade the OpenVMS Alpha operating system
or you can install or upgrade layered products that are included
on the OpenVMS Alpha operating system CD-ROM.

You can also execute DCL commands and procedures to perform
"standalone" tasks, such as backing up the system disk.

Please choose one of the following:

1) Install or upgrade OpenVMS Alpha Version V6.2-1H3
2) List layered product kits that this procedure can install
3) Install or upgrade layered product(s)
4) Execute DCL commands and procedures
5) Shut down this system

Enter CHOICE or ? to repeat menu: (1/2/3/4/5/?) 4

WARNING --

The normal VMS startup procedure has not executed.
Some commands and utilities will not work as documented.

Enter DCL commands -- Enter "LOGOUT" when done.
When you enter "LOGOUT" a message will be displayed saying
"Process SA_STARTUP_DCL logged out at ",
and you will be returned to the menu.

$$$ sh cpu

CPU type: AlphaServer 800 5/400
Multiprocessing is DISABLED. Uniprocessing synchronization image loaded.
Minimum multiprocessing revision levels: CPU = 1

PRIMARY CPU = 00
Active CPUs: 00
Configured CPUs: 00
_________________________________
Enter CHOICE or ? to repeat menu: (1/2/3/4/5/?) 2

The following Layered Product kits are available on the OpenVMS
Distribution Compact Disk and can be installed at this time:

%PCSI-E-OPENIN, error opening DKA400:[KITS.*]*-*-*-%%%%%-*-*.PCSI*; as input
-RMS-E-DNF, directory not found
-SYSTEM-W-NOSUCHFILE, no such file
%PCSI-E-S_OPFAIL, operation failed
%PCSIUI-E-ABORT, fatal error encountered - operation terminated

Thanks,
Amaresh

Re: Invalid HWRPB Errors

Volker Halle — Fri, 29 Jan 2010 16:02:06 GMT

Amaresh,

the fact, that you can boot the OpenVMS V6.2-1H3 CD on your AlphaServer 800 5/400 does not imply, that it's supported, but that it should at least also boot from your DKC0 disk !

Can you MOUNT/OVER=ID/NOWRITE DKC0: when booted from CD and just try an ANAL/DISK DKC0: ?

Then maybe a DIR DKC0:[*...]SYSBOOT.EXE/FULL ?

Volker.

Re: Invalid HWRPB Errors

Volker Halle — Fri, 29 Jan 2010 16:05:43 GMT

Amaresh,

this may explain it all:

http://h71000.www7.hp.com/wizard/wiz_1502.html

Volker.

Re: Invalid HWRPB Errors

Volker Halle — Fri, 29 Jan 2010 16:09:46 GMT

Amaresh,

it may be a question of the SCSI adapter configuration. There have been AlphaServers 800 around, which did work with V6.2-1H3.

If you have an integrated UltraSCSI controller, then you may need V7.1-1H1 or ALPSCSI patches for V6.2-1H3.

Volker.

Re: Invalid HWRPB Errors

Swain — Fri, 29 Jan 2010 17:02:23 GMT

$$$ MOUNT/OVER=ID/NOWRITE DKC0:
$$$ sh dev dkc0
Device Device Error Volume Free Trans Mnt

Name Status Count Label Blocks Count Cnt

DKC0: Mounted alloc 0 ALPHAVMS015 6965775 1 1

$$$ ANAL/DISK DKC0:

Analyze/Disk_Structure for _DKC0: started on 29-JAN-2010 12:07:41.50

%ANALDISK-I-OPENQUOTA, error opening QUOTA.SYS
-SYSTEM-W-NOSUCHFILE, no such file
%ANALDISK-W-BADHEADER, file (6,7,1)
invalid file header
-ANALDISK-I-FIDNUM_ZERO, file number zero but not a valid deleted header
-ANALDISK-I-INVHEADER_BUSY, invalid file header marked "busy"
in index file bitmap
%ANALDISK-W-BADDIRENT, invalid file identification in directory entry
[SYS0.SYSCOMMON.SYSMGR]AMARESHS.DIR;1
-ANALDISK-I-BAD_DIRHEADER, no valid file header for directory
%ANALDISK-W-BADDIRENT, invalid file identification in directory entry
[SYS0.SYSCOMMON.SYSMGR]AMS$RESULT.CFG;1
.
.
.
.
$$$ DIR DKC0:[*...]SYSBOOT.EXE/FULL

Directory DKC0:[SYS0.SYSCOMMON.SYSEXE]

SYSBOOT.EXE;1 File ID: (14671,131,0)
Size: 647/648 Owner: [1,4]
Created: 26-APR-1996 12:45:10.64
Revised: 14-MAY-1996 14:16:58.56 (15)
Expires:
Backup:
Effective:
Recording:
File organization: Sequential
Shelved state: Online
File attributes: Allocation: 648, Extend: 0, Global buffer count: 0
No version limit, Contiguous best try, MoveFile disabled
Record format: Fixed length 512 byte records
Record attributes: None
RMS attributes: None
Journaling enabled: None
File protection: System:RWED, Owner:RWED, Group:RE, World:RE
Access Cntrl List: None

Total of 1 file, 647/648 blocks.

Directory DKC0:[VMS$COMMON.SYSEXE]

SYSBOOT.EXE;1 File ID: (14671,131,0)
Size: 647/648 Owner: [1,4]
Created: 26-APR-1996 12:45:10.64
Revised: 14-MAY-1996 14:16:58.56 (15)
Expires:
Backup:
Effective:
Recording:
File organization: Sequential
Shelved state: Online
File attributes: Allocation: 648, Extend: 0, Global buffer count: 0
No version limit, Contiguous best try, MoveFile disabled
Record format: Fixed length 512 byte records
Record attributes: None
RMS attributes: None
Journaling enabled: None
File protection: System:RWED, Owner:RWED, Group:RE, World:RE
Access Cntrl List: None

Total of 1 file, 647/648 blocks.

Grand total of 2 directories, 2 files, 1294/1296 blocks.
$$$

Re: Invalid HWRPB Errors

Volker Halle — Fri, 29 Jan 2010 17:24:19 GMT

Amaresh,

try a diagnostic boot and capture the output:

>>> b -fl 0,30000 DKC0

This should give very detailled information about the disk IOs of APB (Alpha Primary Bootstrap) trying to load SYSBOOT.EXE...

Volker.

Re: Invalid HWRPB Errors

Volker Halle — Fri, 29 Jan 2010 17:28:31 GMT

Amaresh,

please find attached the full diagnostic boot output from an OpenVMS V6.2-1H3 successful load of SYSBOOT.EXE

Use it for reference to compare it with your failing boot.

Volker.

Re: Invalid HWRPB Errors

Volker Halle — Fri, 29 Jan 2010 17:38:00 GMT

Amaresh,

please also note:

%ANALDISK-W-BADHEADER, file (6,7,1)
invalid file header

This is a very disturbing message ! FID (6,6,0) should be the File ID of VOLSET.SYS and it should NEVER change. Could this disk have been mounted into some volume set by operator error ?

Volker.

Re: Invalid HWRPB Errors

Volker Halle — Sat, 30 Jan 2010 09:05:53 GMT

Amaresh,

I've analyzed the sequence of Boot QIOs when loading SYSBOOT.EXE. This will allow you to immediately diagnose, which boot QIO fails and which file or file hdr is corrupted:

%APB-I-BOOTVOL, Mounting boot volume
Boot QIO: LEN=0200 LBN=00000001 ! Home block
Boot QIO: LEN=0200 LBN=00049430 ! INDEXF.SYS File Hdr
Boot QIO: LEN=0200 LBN=00049433 ! 000000.DIR File Hdr
Boot QIO: LEN=2800 LBN=00000006 ! 000000.DIR contents
%APB-I-SYSROOT, System root is [SYS0.]
Boot QIO: LEN=0200 LBN=0004943A ! [000000]SYS0.DIR File Hdr
Boot QIO: LEN=0200 LBN=0004943A ! [000000]SYS0.DIR File Hdr
Boot QIO: LEN=0200 LBN=00064B30 ! [000000]SYS0.DIR contents
Boot QIO: LEN=0200 LBN=00049C81 ! [SYS0]SYSEXE.DIR File Hdr
Boot QIO: LEN=0200 LBN=00029610 ! [SYS0]SYSEXE.DIR contents
Boot QIO: LEN=0200 LBN=0004943B ! [SYS0]SYSCOMMON.DIR File Hdr
Boot QIO: LEN=0400 LBN=00064B42 ! [SYS0]SYSCOMMON.DIR contents
Boot QIO: LEN=0200 LBN=000495BE ! [SYS0.SYSCOMMON]SYSEXE.DIR File Hdr
Boot QIO: LEN=01E00 LBN=0006CEC4 ! [SYS0.SYSCOMMON]SYSEXE.DIR Contents
Boot QIO: LEN=0200 LBN=00049671 ! [SYS0.SYSCOMMON.SYSEXE]SYSBOOT.EXE File Hdr
%APB-I-LOADFILE, Loading [SYS0.SYSCOMMON.SYSEXE]SYSBOOT.EXE;1
Boot QIO: LEN=0200 LBN=000790A4 ! [SYS0.SYSCOMMON.SYSEXE]SYSBOOT.EXE Image Hdr
Boot QIO: LEN=50A00 LBN=000790A6 ! [SYS0.SYSCOMMON.SYSEXE]SYSBOOT.EXE contents
%APB-I-SECBOOT, Transferring to secondary bootstrap

Volker.

Re: Invalid HWRPB Errors

Swain — Fri, 05 Feb 2010 16:30:01 GMT

Hi,

what is the feasibility of building a DR on Charon-AXp?

Thanks,
Amaresh

Re: Invalid HWRPB Errors

Volker Halle — Fri, 05 Feb 2010 18:21:15 GMT

Amaresh,

using a CHARON-AXP for the DR site may work well. The CPU performance will even be better than with the older Alphas (e.g. AlphaServer 800 5/400). V6.2-1H3 is supported. You just need to check, if there are any 'unusual' interface cards in the existing Alpha - this would be unusual, but should be checked.

Volker.

Disclaimer: Invenate is a CHARON reseller.

Re: Invalid HWRPB Errors

Steve Reece_3 — Sat, 06 Feb 2010 07:26:22 GMT

If this is a DR system, preumably the live system (the 1000A 5/400) has the UltraSCSI patch installed on it? If this is the case, why not restore the system disk off the live box onto the DR, then rename the system to have the identity and update the licenses so that they reflect the DR system?

For the restore, it won't matter what version of VMS you run the restore with as long as the system is supported by it.

Steps for renaming the system will be found in the VMS FAQ which I'm sure is on Hoff's website. Disabling the live system's licenses is a case of running the LICENSE utility, same for reloading the DR system's own licenses.

If this doesn't work then the AlphaServer 800 really doesn't fulfil the needs of a DR system...

Steve

Re: Invalid HWRPB Errors

Swain — Tue, 09 Feb 2010 15:28:09 GMT

Volker,

Charon option looks convincing.

Steve,

>>UltraSCSI patch installed on it?

How can I get details of patch?

Thanks,
Amaresh