topic Re: DEC AXPVMS GNV V1.5-6 Installation Problem in Operating System - OpenVMS

DEC AXPVMS GNV V1.5-6 Installation Problem

Jefferson Humber — Mon, 19 Jan 2004 13:14:18 GMT

Am getting the following message when trying to install GNV v.1.5-6 on OpenVMS 7.3-2.

Does anybody have any ideas on how to get around this ? Have tried re-downloading the kit from HP already.....

GAYLORD::SYSTEM$ product install gnv

The following product has been selected:
DEC AXPVMS GNV V1.5-6 Layered Product

Do you want to continue? [YES]

Configuration phase starting ...

You will be asked to choose options, if any, for each selected product and for
any products that may be installed to satisfy software dependency requirements.

DEC AXPVMS GNV V1.5-6

Do you want the defaults for all options? [YES]

Do you want to review the options? [NO]

Execution phase starting ...

The following product will be installed to destination:
DEC AXPVMS GNV V1.5-6 DISK$ALPHASYS:[VMS$COMMON.]

Portion done: 0%...10%...20%...30%...40%...50%...60%...70%...80%...90%
%PCSI-I-PRCOUTPUT, output from subprocess follows ...
%RENAME-E-OPENOUT, error opening $1$DGA10:[SYS4.SYSCOMMON.GNV.SRC.GNV.BASH]CONFIG^.H.MINI; as output
-RMS-E-ENT, ACP enter function failed
-SYSTEM-W-BADFILEVER, bad file version number

%PCSI-E-EXEINSFAIL, product supplied EXECUTE INSTALL procedure failed
-RENAME-E-OPENOUT, error opening !AS as output
%PCSI-E-OPFAILED, operation failed
Terminating is strongly recommended. Do you want to terminate? [YES]

Re: DEC AXPVMS GNV V1.5-6 Installation Problem

Martin P.J. Zinser — Mon, 19 Jan 2004 13:27:56 GMT

Hello Jefferson,

is $1$DGA10 a ODS-5 structured disk? I think this is a requirement for GNV.

Greetings, Martin

Re: DEC AXPVMS GNV V1.5-6 Installation Problem

labadie_1 — Mon, 19 Jan 2004 14:46:52 GMT

and it is easy to test it: f$getdvi has an item acptype, which gives F11V2 or F11V5 (for an ODS-5 disk). If it is that, the installation procedure should add this test.

Re: DEC AXPVMS GNV V1.5-6 Installation Problem

Craig A Berry — Mon, 19 Jan 2004 15:23:10 GMT

You may also need to do

$ set process/parse=extended

before running the installer even if the target disk is ODS-5. It looks like it is a DCL rename that is failing.

Re: DEC AXPVMS GNV V1.5-6 Installation Problem

Jefferson Humber — Mon, 19 Jan 2004 16:38:13 GMT

Thanks, should of really paid more attention to the L.P requirements first.

Seeing how easy it is to check for whether your disk is ODS-5, I'm surprised the installation routine doesn't check for you ?

If I convert my disk to ODS-5 are there any side effects I can expect, it mentions in the GNV release notes about case sensitivity.

Thanks again,

Jeff

Re: DEC AXPVMS GNV V1.5-6 Installation Problem

labadie_1 — Mon, 19 Jan 2004 16:45:17 GMT

If you convert your disk to ODS-5, you must notice that if you think it is a bad idea, it is not as simple to go back to ODS-2.

Re: DEC AXPVMS GNV V1.5-6 Installation Problem

Martin P.J. Zinser — Mon, 19 Jan 2004 18:45:52 GMT

Hello Jefferson,

converting the system disk to ODS-5 is supported since VMS 7.3 I think. If you do not yet have any experience with this I would suggest to experiment with a data disk first before switching the system disk. Check the GNV instructions if it needs to reside on the system disk, else you can redirect the installation using the /destination=path qualifier to the product install command.

HTH,

Martin

Re: DEC AXPVMS GNV V1.5-6 Installation Problem

Karl Rohwedder — Tue, 20 Jan 2004 00:56:01 GMT

This is a known MINOR problem, the recommendation is to continue the instalation.
Pls. see comp.ox.vms at http://groups.google.de/groups?q=gnv+group:comp.os.vms&hl=de&lr=&ie=UTF-8&group=comp.os.vms&selm=B_iKa.3350%243y1.2848%40news.cpqcorp.net&rnum=2

Re: DEC AXPVMS GNV V1.5-6 Installation Problem

Lokesh_2 — Tue, 20 Jan 2004 03:55:25 GMT

Hi,

I agree with Martin. I faced the same problem . Only thing I did is installed GNV on my ODS-5 DATA disk ( instead of default ODS-2 SYSTEM disk ). It is working fine for me without any problem .

Best regards,
Lokesh

Re: DEC AXPVMS GNV V1.5-6 Installation Problem

Brad McCusker — Tue, 20 Jan 2004 13:06:43 GMT

Martin wrote:

>Check the GNV instructions if it needs to
>reside on the system disk, else you can
>redirect the installation using
>the /destination=path qualifier to the >product install command.

As of 1.5-6, there is no longer a requirement that GNV be installed on the system disk. So, the answer here is to either convert your system disk to ODS-5, or, install on some other ODS-5 disk.

Re: DEC AXPVMS GNV V1.5-6 Installation Problem

otto kho_1 — Wed, 04 Feb 2004 13:27:00 GMT

Got this message when trying to install on ODS-2 disk, it installed fine when the target/destination is an ODS 5 disk