topic Re: ILOs are getting always new IP address from DHCP, how we can control frequent IP changes. in Server Management - Remote Server Management

ILOs are getting always new IP address from DHCP, how we can control frequent IP changes.

vishalgarg — Sun, 09 Jun 2024 03:45:56 GMT

Hi ,

We are facing communicatoin issue between ILO and HPEOneView after change the IP of ILO. ILO does not report back new IP to HPEOneview for a long time and we lost communicatoin.

Re: ILOs are getting always new IP address from DHCP, how we can control frequent IP changes.

MV3 — Mon, 16 Sep 2024 09:31:45 GMT

Hello,

Can you ping the iLO IP from OneView?

Procedure:

From the main menu, navigate to the Settings screen.
In the Networking panel, click Networking.
Select Actions > Ping.
The Ping screen will open.
Enter the target host name or IP address, then click Ping.
Check the output in the Results field.
Click Close to stop pinging and close the screen.
If the ping fails, engage your network team to investigate the communication issue.

If there is a reply, remove the old certificate from the OneView Trust store, add the new certificate, and check.

Cheers...

Query: ILOs are getting always new IP address from DHCP, how we can control frequent IP changes.

support_s — Wed, 12 Jun 2024 08:09:37 GMT

Hello,

Let us know if you were able to resolve the issue.

If you have no further query, and you are satisfied with the answer then kindly mark the topic as Solved so that it is helpful for all community members.

Please click on "Thumbs Up/Kudo" icon to give a "Kudo".

Thank you for being a HPE valuable community member.