topic Re: redfish storagecontroller deletevolume is not working in Server Management - Remote Server Management

redfish storagecontroller deletevolume is not working

lv22 — Sun, 23 Jun 2024 13:45:42 GMT

Hello

I try to delete all volume with redfish like :

"url": "https://@IPILO/redfish/v1/Systems/1/Storage/DE00B000/Actions/Storage.ResetToDefaults"

with

"body": {
"ResetType": "ResetAll"
},

I get :

"MessageId": "Base.1.18.Success"

But all volumes are still there ; none deleted

Ilo 6 1.56 Jan 27 2024

FirmwareVersion: 1.512

HPE SR932i-p Gen11

Re: redfish storagecontroller deletevolume is not working

yesheswini_s — Fri, 14 Jun 2024 13:40:48 GMT

Hi @lv22 ,

Please check whether you have used the 'DELETE' method as specified in this guide.

Re: redfish storagecontroller deletevolume is not working

lv22 — Fri, 14 Jun 2024 13:54:56 GMT

Hi ,

With :

"url": https://@IP_ILO/redfish/v1/Systems/1/Storage/DE00B000/Volumes/101
And
"method": "DELETE"

I get : Status code was 405 and not [200, 201]: HTTP Error 405: Method Not Allowed

Re: redfish storagecontroller deletevolume is not working

thutchings — Mon, 16 Sep 2024 09:20:54 GMT

Hello,

I tested this out in the lab and this worked for me. I issued POST to "https://<iLO IP>/redfish/v1/Systems/1/Storage/DE00C000/Actions/Storage.ResetToDefaults" with the following body:

{
"ResetType": "ResetAll"
}

I previously had a raid 10 configured on an SR416ie-m Gen11 on a SY480 Gen11 running iLO 6 FW 1.56. After issuing this, I went into the array config utility and I see that the four drives that were configured in the raid 10 were then showing as unconfigured drives.

Can you confirm what firmware version is running on your SR932i-p Gen11? I can't find the version you mentioned. The version in use on the SR416ie-m Gen11 in my lab environment is 03.01.23.072 and is not quite a year old.

Regards

Re: redfish storagecontroller deletevolume is not working

lv22 — Mon, 16 Sep 2024 09:30:18 GMT

Hello,

I’ve got :

FirmwareVersion: 03.01.23.072

Best Regards

Re: redfish storagecontroller deletevolume is not working

BPSingh — Mon, 16 Sep 2024 09:33:12 GMT

Please update firmaware to 03.01.26.036 and check if you see any difference.

https://support.hpe.com/connect/s/softwaredetails?language=en_US&collectionId=MTX-29921b6ba8e14e7c&softwareId=MTX_2cf07d395a4a41049425af68c8&tab=releaseNotes

Query: redfish storagecontroller deletevolume is not working

support_s — Wed, 26 Jun 2024 11:07:59 GMT

Hello,

Let us know if you were able to resolve the issue.

If you have no further query, and you are satisfied with the answer then kindly mark the topic as Solved so that it is helpful for all community members.

Please click on "Thumbs Up/Kudo" icon to give a "Kudo".

Thank you for being a HPE valuable community member.