topic Unable to determine Booterror on Proxmox | Get Bootlog via ILO? in Server Management - Remote Server Management

Unable to determine Booterror on Proxmox | Get Bootlog via ILO?

RainerZufall_1 — Mon, 25 Nov 2024 14:02:13 GMT

Hello,

I need to switch operating systems. I added another harddrive (SSD) to my server and installed proxmox.

Everything worked fine but it immediatly jumped to the old os in my boot options.

It seems that there is a very short appearance of the error message from proxmox but i can´t figure out how to tell the server to show me this message as it immediatly jumps to secound boot option.

I am unable to find some bios option like "halt on errors" or sth.

I deleted all other boot options but then the message appears and he jumps back to bios post saying "no bootable os found" or sth. like that.

I already searched some kind of startup log in ILO(4) but i am unable to find.

Can you help me?

Physical access to server is available.

greetings

Query: Unable to determine Booterror on Proxmox | Get Bootlog via ILO?

support_s — Thu, 21 Nov 2024 23:14:51 GMT

System recommended content:

1. HPE iLO 5 3.06 User Guide | iLO access settings options

2. HPE iLO 6 1.61 User Guide | iLO access settings options

Please click on "Thumbs Up/Kudo" icon to give a "Kudo".

Thank you for being a HPE valuable community member.

Re: Unable to determine Booterror on Proxmox | Get Bootlog via ILO?

TVVJ — Mon, 25 Nov 2024 13:58:53 GMT

Hello,

Please refer to section "POST F1 Prompt" on page 82 of the "HP ROM-Based Setup Utility User Guide" and configure it so as for the message to be displayed and you may press "F1" to proceed.

Regards,

Query: Unable to determine Booterror on Proxmox | Get Bootlog via ILO?

support_s — Wed, 27 Nov 2024 16:12:24 GMT

Hello,

Let us know if you were able to resolve the issue.

If you have no further query, and you are satisfied with the answer then kindly mark the topic as Solved so that it is helpful for all community members.

Please click on "Thumbs Up/Kudo" icon to give a "Kudo".

Thank you for being a HPE valuable community member.

Betreff: Query: Unable to determine Booterror on Proxmox | Get Bootlog via ILO?

RainerZufall_1 — Fri, 29 Nov 2024 09:37:55 GMT

@TVVJ That solution is unlucky not working

This Bios post option is already enabled "halt with a delay". But i still don´t see the proxmox error. I am quite sure it´s a proxmox startup error, but in some way bios can recognize it otherwise it wouldn´t switch to the secondary boot option.

Server is ML 30 Gen 9. Absolutely perfect working with my old OS.

I will try to boot a Live Linux and access the proxmox harddrive externaly to get the syslogs. I was just hoping there is an easier way.

Greetings.