https://community.hpe.com/t5/server-management-remote-server/configuring-ilo-to-dynamically-update-dns/m-p/3595416#M1425 Hi,<BR />how can I configure the ILO/RILOE II to update the Active Directory DNS dynamically (unsecure is allowed)<BR />Thx and best regards Wed, 03 Aug 2005 03:54:42 GMT DamianN 2005-08-03T03:54:42Z https://community.hpe.com/t5/server-management-remote-server/configuring-ilo-to-dynamically-update-dns/m-p/3595416#M1425 Hi,<BR />how can I configure the ILO/RILOE II to update the Active Directory DNS dynamically (unsecure is allowed)<BR />Thx and best regards Wed, 03 Aug 2005 03:54:42 GMT https://community.hpe.com/t5/server-management-remote-server/configuring-ilo-to-dynamically-update-dns/m-p/3595416#M1425 DamianN 2005-08-03T03:54:42Z https://community.hpe.com/t5/server-management-remote-server/configuring-ilo-to-dynamically-update-dns/m-p/3595417#M1426 There is a configuration option on the Network Settings page, "Register With DDNS Server". Set this to YES. This is the default behavior for this setting.<BR /><BR />Of course, it requires a DNS server and/or WINS server. Those can also be specified on the Network Settings page. However, if you use DHCP, the DHCP server can respond with the DNS/WINS addresses and automate this.<BR /> Wed, 03 Aug 2005 15:22:54 GMT https://community.hpe.com/t5/server-management-remote-server/configuring-ilo-to-dynamically-update-dns/m-p/3595417#M1426 acartes 2005-08-03T15:22:54Z