https://community.hpe.com/t5/server-management-remote-server/resetting-riloe-ii-via-system-mgmt/m-p/3599493#M1434 When I login to the Sys Mgmt page (https://servername:2381) and attempt to reset the RILOE II card, I receive the following error:<BR />"HP Web Agent HTTP Post Error<BR />An error occurred attempting a SNMP set request.<BR />Invalid type of post request or parameters missing. "<BR /><BR />The RILOE II lost communication with HPONCFG after setting the network parameters and I am attempting to re-establish communication with the card without rebooting.<BR /><BR />Using:<BR /> HTTP Server v5.94.0<BR /> Tue, 09 Aug 2005 08:16:11 GMT Robert Berrie_2 2005-08-09T08:16:11Z https://community.hpe.com/t5/server-management-remote-server/resetting-riloe-ii-via-system-mgmt/m-p/3599493#M1434 When I login to the Sys Mgmt page (https://servername:2381) and attempt to reset the RILOE II card, I receive the following error:<BR />"HP Web Agent HTTP Post Error<BR />An error occurred attempting a SNMP set request.<BR />Invalid type of post request or parameters missing. "<BR /><BR />The RILOE II lost communication with HPONCFG after setting the network parameters and I am attempting to re-establish communication with the card without rebooting.<BR /><BR />Using:<BR /> HTTP Server v5.94.0<BR /> Tue, 09 Aug 2005 08:16:11 GMT https://community.hpe.com/t5/server-management-remote-server/resetting-riloe-ii-via-system-mgmt/m-p/3599493#M1434 Robert Berrie_2 2005-08-09T08:16:11Z https://community.hpe.com/t5/server-management-remote-server/resetting-riloe-ii-via-system-mgmt/m-p/3599494#M1435 Make sure you have SNMP sets enabled in the Insight agent applet in Control Panel and that you have established a write community string in the SNMP service. Tue, 16 Aug 2005 10:39:35 GMT https://community.hpe.com/t5/server-management-remote-server/resetting-riloe-ii-via-system-mgmt/m-p/3599494#M1435 David Claypool 2005-08-16T10:39:35Z