https://community.hpe.com/t5/server-management-remote-server/ilo-feature-to-reboot-the-server/m-p/3619881#M1504 Hi Nickolay!<BR /><BR />List your OS installed on server and RBSU firmware version. What do you mean under "watchdog timer", ASR 2 feature? It can be tuned on RBSU menu, if correct managment agent installed on system. Try to use CLI of iLO. You can remotly reset server using telnet or ssh. Here expamle of command<BR />hpiLO-&gt; start /system1<BR />status=0<BR />status_tag=COMMAND COMPLETED<BR />Server power on.<BR /><BR /><BR />list of possible commands<BR />reset /system1 â Resets the server<BR />reset /system1 hard â Performs a coldstart reboot of the server <BR />reset /system1 soft â Performs a warmstart reboot of the server<BR />show /system1 enabledstate â Shows the current power state, where enabled is powered on and disabled is powered off.<BR /> Wed, 07 Sep 2005 01:45:25 GMT Ruslan 2005-09-07T01:45:25Z https://community.hpe.com/t5/server-management-remote-server/ilo-feature-to-reboot-the-server/m-p/3619880#M1503 Hello!<BR /><BR />Is there any way to run delayed shutdown of the server?<BR />I need to use it for watchdog emulating, because no worked watchdog timers in HP Proliant DL360 Servers. Tue, 06 Sep 2005 13:10:07 GMT https://community.hpe.com/t5/server-management-remote-server/ilo-feature-to-reboot-the-server/m-p/3619880#M1503 Nickolay_1 2005-09-06T13:10:07Z https://community.hpe.com/t5/server-management-remote-server/ilo-feature-to-reboot-the-server/m-p/3619881#M1504 Hi Nickolay!<BR /><BR />List your OS installed on server and RBSU firmware version. What do you mean under "watchdog timer", ASR 2 feature? It can be tuned on RBSU menu, if correct managment agent installed on system. Try to use CLI of iLO. You can remotly reset server using telnet or ssh. Here expamle of command<BR />hpiLO-&gt; start /system1<BR />status=0<BR />status_tag=COMMAND COMPLETED<BR />Server power on.<BR /><BR /><BR />list of possible commands<BR />reset /system1 â Resets the server<BR />reset /system1 hard â Performs a coldstart reboot of the server <BR />reset /system1 soft â Performs a warmstart reboot of the server<BR />show /system1 enabledstate â Shows the current power state, where enabled is powered on and disabled is powered off.<BR /> Wed, 07 Sep 2005 01:45:25 GMT https://community.hpe.com/t5/server-management-remote-server/ilo-feature-to-reboot-the-server/m-p/3619881#M1504 Ruslan 2005-09-07T01:45:25Z