topic Re: How to reset ILO in Server Management - Remote Server Management

How to reset ILO

krishnakanth — Wed, 09 Nov 2005 20:10:25 GMT

Hi all...

I am able to ping ILO interface. But i am not able to do SSH. During POST I am getting an error message which reads out saying " Integrated Lights on Management is temporarily Unavailabe (1) " How to handle this problem ??

Re: How to reset ILO

Ruslan — Thu, 10 Nov 2005 03:58:57 GMT

Can you login via https access? Verify iLO settings pressing F8 during boot process.

Re: How to reset ILO

acartes — Mon, 03 Apr 2006 17:55:57 GMT

This sounds like the iLO is unable or unwilling to boot. I would recommend updating the iLO firmware by booting to the SmartStart firmware update CD. This will upgrade the iLO firmware and also reset the iLO processor. After that, iLO should be available.

Note that you may need to set the iLO security override switch to allow the upgrade to work.

Re: How to reset ILO

acartes — Fri, 05 May 2006 09:45:24 GMT

If it is still unresponsive, you may want to try resetting iLO to defaults. You can do this from the host using HPONCFG:

http://forums1.itrc.hp.com/service/forums/questionanswer.do?threadId=1017653