https://community.hpe.com/t5/server-management-remote-server/snmp-trap-9009/m-p/3132174#M165 Is this a RILOE or RILOE II? <BR />If it is a RILOE, the DL380G2 does not have a 16 pin connector; use the external 'WYE'keybd/mouse cable.<BR /><BR />If you remove the RILOE card and reboot the server (w/keybd/mouse attached to the server), is the mouse detected? Tue, 02 Dec 2003 19:00:53 GMT barnett chan 2003-12-02T19:00:53Z https://community.hpe.com/t5/server-management-remote-server/snmp-trap-9009/m-p/3132173#M164 Greetings,<BR />I have this error in my DL380G2 Proliant Server (with a RILOE),<BR />A 'Remote Insight Board Mouse Disconnected' trap signifies that the Compaq Remote Insight Board mouse has been disconnected.<BR />I have physically connected one mouse in this server but i still get this error. The funny thing is, when i restart the server, the mouse was not detected? Can it be a problem with RILOE or just simply something wrong with the PS2 port?<BR /><BR />Appreciate any advise, thanks Mon, 01 Dec 2003 04:24:42 GMT https://community.hpe.com/t5/server-management-remote-server/snmp-trap-9009/m-p/3132173#M164 Alan Tan_2 2003-12-01T04:24:42Z https://community.hpe.com/t5/server-management-remote-server/snmp-trap-9009/m-p/3132174#M165 Is this a RILOE or RILOE II? <BR />If it is a RILOE, the DL380G2 does not have a 16 pin connector; use the external 'WYE'keybd/mouse cable.<BR /><BR />If you remove the RILOE card and reboot the server (w/keybd/mouse attached to the server), is the mouse detected? Tue, 02 Dec 2003 19:00:53 GMT https://community.hpe.com/t5/server-management-remote-server/snmp-trap-9009/m-p/3132174#M165 barnett chan 2003-12-02T19:00:53Z