https://community.hpe.com/t5/server-management-remote-server/snmp-trap-when-a-raid-or-power-supply-fails/m-p/3696669#M1713 Hello <BR />What kind of SNMP TRAP send a the ILO Board. It would like to be informed, when raid or an power supply fails.<BR />Is this possible over ILO?<BR />Cheers Günther Thu, 22 Dec 2005 06:32:46 GMT ILO with SNMP 2005-12-22T06:32:46Z https://community.hpe.com/t5/server-management-remote-server/snmp-trap-when-a-raid-or-power-supply-fails/m-p/3696669#M1713 Hello <BR />What kind of SNMP TRAP send a the ILO Board. It would like to be informed, when raid or an power supply fails.<BR />Is this possible over ILO?<BR />Cheers Günther Thu, 22 Dec 2005 06:32:46 GMT https://community.hpe.com/t5/server-management-remote-server/snmp-trap-when-a-raid-or-power-supply-fails/m-p/3696669#M1713 ILO with SNMP 2005-12-22T06:32:46Z https://community.hpe.com/t5/server-management-remote-server/snmp-trap-when-a-raid-or-power-supply-fails/m-p/3696670#M1714 The Insight agents (part of the ProLiant Support Pack) are responsible for monitoring and alerting. iLO has the ability to forward these alerts in case of a interrupted path between the host and HP SIM. Thu, 22 Dec 2005 10:49:30 GMT https://community.hpe.com/t5/server-management-remote-server/snmp-trap-when-a-raid-or-power-supply-fails/m-p/3696670#M1714 David Claypool 2005-12-22T10:49:30Z https://community.hpe.com/t5/server-management-remote-server/snmp-trap-when-a-raid-or-power-supply-fails/m-p/3696671#M1715 You can send environment SNMP traps through iLO.<BR /><BR />1) load the management agents (on the SmartStart management CD)<BR />2) configure iLO to enable SNMP traps and pass through<BR />3) test the iLO trap functionality is received. Mon, 03 Apr 2006 17:22:39 GMT https://community.hpe.com/t5/server-management-remote-server/snmp-trap-when-a-raid-or-power-supply-fails/m-p/3696671#M1715 acartes 2006-04-03T17:22:39Z