topic Re: RIB.CPL version and RILOEII in Server Management - Remote Server Management

RIB.CPL version and RILOEII

Stephen Cassells — Wed, 17 Dec 2003 09:01:56 GMT

Can anyone confirm the correct version of RIB.CPL to use in order to make changes to the RIB configuration on a RILOEII board. I currently have version 2.0.0.4 [is this one file suitable on NT4 and Win2K ] - Many thanks

Re: RIB.CPL version and RILOEII

David Claypool — Thu, 18 Dec 2003 19:12:22 GMT

RIB.CPL was a pre-RILOE Control Panel applet that "happened" to work on the original RILOE but was not supported and was eventuallly dropped altogether. Supported configuration methods are through [F8] setup and the XML interface through the network.

A CLI-based local configuration tool is in development.

Re: RIB.CPL version and RILOEII

Ed Cox — Thu, 18 Dec 2003 19:16:37 GMT

Stephen,
Are you referring to the lovely "day glow pink" icon under control panel? From what I have been told, rib.cpl and rib.hlp were written for the old RIB card, the one with the modem on it. It could also have been used with Riloe I, but one of the engineers told me that it definitely won't work with Riloe II. I would recommend using the Riloe Lights Out config utility (Sp23511)
Ed

rdpexperts.com

Re: RIB.CPL version and RILOEII

Stephen Cassells — Fri, 19 Dec 2003 03:37:21 GMT

Thanks for these answers guys. It certainly answers a few questions I had. I'll also pass this info around my other IT colleagues as it's bound to affect them too. Much obliged. Steve

Re: RIB.CPL version and RILOEII

John Kramer — Wed, 31 Dec 2003 14:06:18 GMT

Any idea when the local RIB CLI will be ready?