https://community.hpe.com/t5/server-management-remote-server/remote-insight-in-readonly-mode/m-p/3151136#M200 DL360 last firmware uploaded on the Remote Insight, but if i try to connect in telnet or https, i can only VIEW what's happening, but no input is accepted: mouse, keyboard, or the "Ctrl-Alt-Del" button in web interface.<BR /><BR />Why? My user is configured with<BR />full provileges.<BR /><BR />I'm using as client Win2k IE6 + JRE 1.3.1<BR />and win2003 as server. Mon, 22 Dec 2003 13:33:04 GMT michele_23 2003-12-22T13:33:04Z https://community.hpe.com/t5/server-management-remote-server/remote-insight-in-readonly-mode/m-p/3151136#M200 DL360 last firmware uploaded on the Remote Insight, but if i try to connect in telnet or https, i can only VIEW what's happening, but no input is accepted: mouse, keyboard, or the "Ctrl-Alt-Del" button in web interface.<BR /><BR />Why? My user is configured with<BR />full provileges.<BR /><BR />I'm using as client Win2k IE6 + JRE 1.3.1<BR />and win2003 as server. Mon, 22 Dec 2003 13:33:04 GMT https://community.hpe.com/t5/server-management-remote-server/remote-insight-in-readonly-mode/m-p/3151136#M200 michele_23 2003-12-22T13:33:04Z https://community.hpe.com/t5/server-management-remote-server/remote-insight-in-readonly-mode/m-p/3151137#M201 Which RIB board do you have and which DL360? The original 360 only had a supported connector for the RILOE board, where the G2 and G3 have the 30 pin connector for RILOE-II. If you are not connecting an internal cable then you need to use the "Y" keyboard/mouse cable that came with the board. If you are connecting the RIB internally, do not use the "y" cable. Let me know if you still have problems. Mon, 05 Jan 2004 17:53:57 GMT https://community.hpe.com/t5/server-management-remote-server/remote-insight-in-readonly-mode/m-p/3151137#M201 Junior Yharte 2004-01-05T17:53:57Z