https://community.hpe.com/t5/server-management-remote-server/honcfg-settings-are-not-applied/m-p/3829026#M2044 Using this xml script<BR /><BR /><RIBCL version="2.0"><BR /> <LOGIN user_login="Administrator" password="x"><BR /> <RIB_INFO mode="write"><BR /> <MOD_SNMP_IM_SETTINGS><BR /> <WEB_AGENT_IP_ADDRESS value="wiepc24519lab.corp.heidelberg.com"></WEB_AGENT_IP_ADDRESS> <BR /> </MOD_SNMP_IM_SETTINGS><BR /> <MOD_GLOBAL_SETTINGS><BR /> <PASSTHROUGH_CONFIG value="3"></PASSTHROUGH_CONFIG> <BR /> </MOD_GLOBAL_SETTINGS><BR /> <LICENSE><BR /> <ACTIVATE key="x"></ACTIVATE> <BR /> </LICENSE><BR /> <MOD_NETWORK_SETTINGS><BR /> <PRIMARY_DNS_DOMAIN value="corp.heidelberg.com"></PRIMARY_DNS_DOMAIN> <BR /> <SPEED_AUTOSELECT value="N"></SPEED_AUTOSELECT> <BR /> <NIC_SPEED value="100"></NIC_SPEED> <BR /> <FULL_DUPLEX value="Y"></FULL_DUPLEX> <BR /> <DHCP_ENABLE value="N"></DHCP_ENABLE> <BR /> <IP_ADDRESS value="10.50.41.36"></IP_ADDRESS> <BR /> <SUBNET_MASK value="255.255.254.0"></SUBNET_MASK> <BR /> <GATEWAY_IP_ADDRESS value="10.50.41.1"></GATEWAY_IP_ADDRESS> <BR /> </MOD_NETWORK_SETTINGS><BR /> </RIB_INFO><BR /> </LOGIN><BR /> </RIBCL><BR /><BR />on this DL380 G3 iLO Firmware 1.82 i simply get no results.<BR />There is no error message but the settings are not applied.<BR />i am pretty confident that the script is fine.<BR />The Support Pack is version 7.51.<BR /> Mon, 24 Jul 2006 04:12:53 GMT Markus Braun 2006-07-24T04:12:53Z https://community.hpe.com/t5/server-management-remote-server/honcfg-settings-are-not-applied/m-p/3829026#M2044 Using this xml script<BR /><BR /><RIBCL version="2.0"><BR /> <LOGIN user_login="Administrator" password="x"><BR /> <RIB_INFO mode="write"><BR /> <MOD_SNMP_IM_SETTINGS><BR /> <WEB_AGENT_IP_ADDRESS value="wiepc24519lab.corp.heidelberg.com"></WEB_AGENT_IP_ADDRESS> <BR /> </MOD_SNMP_IM_SETTINGS><BR /> <MOD_GLOBAL_SETTINGS><BR /> <PASSTHROUGH_CONFIG value="3"></PASSTHROUGH_CONFIG> <BR /> </MOD_GLOBAL_SETTINGS><BR /> <LICENSE><BR /> <ACTIVATE key="x"></ACTIVATE> <BR /> </LICENSE><BR /> <MOD_NETWORK_SETTINGS><BR /> <PRIMARY_DNS_DOMAIN value="corp.heidelberg.com"></PRIMARY_DNS_DOMAIN> <BR /> <SPEED_AUTOSELECT value="N"></SPEED_AUTOSELECT> <BR /> <NIC_SPEED value="100"></NIC_SPEED> <BR /> <FULL_DUPLEX value="Y"></FULL_DUPLEX> <BR /> <DHCP_ENABLE value="N"></DHCP_ENABLE> <BR /> <IP_ADDRESS value="10.50.41.36"></IP_ADDRESS> <BR /> <SUBNET_MASK value="255.255.254.0"></SUBNET_MASK> <BR /> <GATEWAY_IP_ADDRESS value="10.50.41.1"></GATEWAY_IP_ADDRESS> <BR /> </MOD_NETWORK_SETTINGS><BR /> </RIB_INFO><BR /> </LOGIN><BR /> </RIBCL><BR /><BR />on this DL380 G3 iLO Firmware 1.82 i simply get no results.<BR />There is no error message but the settings are not applied.<BR />i am pretty confident that the script is fine.<BR />The Support Pack is version 7.51.<BR /> Mon, 24 Jul 2006 04:12:53 GMT https://community.hpe.com/t5/server-management-remote-server/honcfg-settings-are-not-applied/m-p/3829026#M2044 Markus Braun 2006-07-24T04:12:53Z