https://community.hpe.com/t5/server-management-remote-server/dl360-onboard-video/m-p/3927017#M2492 Hi all,<BR />I have a DL360 G2 with a defect onboard video card. I try to add a video card (PCI 64) but still no image! Is there a way to do that.....i suppose i have to go to bios to deactivate the onboard video but.....no image!!<BR />Also, the console on my ILO port doesn't work...<BR />Someone have an idea? Tue, 16 Jan 2007 09:49:10 GMT Patrick Côté 2007-01-16T09:49:10Z https://community.hpe.com/t5/server-management-remote-server/dl360-onboard-video/m-p/3927017#M2492 Hi all,<BR />I have a DL360 G2 with a defect onboard video card. I try to add a video card (PCI 64) but still no image! Is there a way to do that.....i suppose i have to go to bios to deactivate the onboard video but.....no image!!<BR />Also, the console on my ILO port doesn't work...<BR />Someone have an idea? Tue, 16 Jan 2007 09:49:10 GMT https://community.hpe.com/t5/server-management-remote-server/dl360-onboard-video/m-p/3927017#M2492 Patrick Côté 2007-01-16T09:49:10Z https://community.hpe.com/t5/server-management-remote-server/dl360-onboard-video/m-p/3927018#M2493 If the onboard video is defective, then you may be unable to access the remote console using iLO since this is tied to the onboard video controller- it depends what is defective.<BR /><BR />You can add a 3rd party video adapter to the host. The system ROM BIOS will automatically select the new adapter as the primary controller.<BR /><BR />If you can get OS support to load for both adapters, then you should be able to access the output from the integrated video using iLO. Wed, 17 Jan 2007 12:40:21 GMT https://community.hpe.com/t5/server-management-remote-server/dl360-onboard-video/m-p/3927018#M2493 acartes 2007-01-17T12:40:21Z