https://community.hpe.com/t5/server-management-remote-server/ilo2-failed-to-connect-to-server-message/m-p/3955205#M2592 If I try and remotely connect to my server (DL360 G5), I get an error message appear "Failed to connect to server. Check for avalaible telnet connection." I am using all the default ports and my router is setup to allow these ports through the firewall. I also have the latest firmware 1.26 loaded which was supposed to correct the NAT problem. The Java console works OK but I prefer the http versions. Is there still a bug in the latest firmware or am I overlooking something. All works ok when connected to network internally. Also - I have disabled firewall on remote PC and allowed ALL ports on router but this makes no difference. Sun, 04 Mar 2007 13:22:41 GMT Jason Brown 2007-03-04T13:22:41Z https://community.hpe.com/t5/server-management-remote-server/ilo2-failed-to-connect-to-server-message/m-p/3955205#M2592 If I try and remotely connect to my server (DL360 G5), I get an error message appear "Failed to connect to server. Check for avalaible telnet connection." I am using all the default ports and my router is setup to allow these ports through the firewall. I also have the latest firmware 1.26 loaded which was supposed to correct the NAT problem. The Java console works OK but I prefer the http versions. Is there still a bug in the latest firmware or am I overlooking something. All works ok when connected to network internally. Also - I have disabled firewall on remote PC and allowed ALL ports on router but this makes no difference. Sun, 04 Mar 2007 13:22:41 GMT https://community.hpe.com/t5/server-management-remote-server/ilo2-failed-to-connect-to-server-message/m-p/3955205#M2592 Jason Brown 2007-03-04T13:22:41Z