https://community.hpe.com/t5/server-management-remote-server/lights-out-100i-and-windows-event-logs/m-p/3957097#M2609 Hi,<BR />I have just purchased a DL140 G3 server with Lights-Out 100i which works fine through the iLO ethernet port or in-band through the NIC. However, the information such as fan health etc is only available remotely. I would like to access this from the server itself under Windows Server 2003 Web Edition.<BR />Have tried everything I can think of including installing the DL140 IMPI driver and System Management Homepage for Proliant (which shows no sensors it can read) but to no avail. All I really want is failure and status notifications in the Windows System event log. Is this too much to ask?<BR /><BR />Any help very much appreciated!<BR />Thanks. Wed, 07 Mar 2007 02:30:55 GMT Jeremy Dore 2007-03-07T02:30:55Z https://community.hpe.com/t5/server-management-remote-server/lights-out-100i-and-windows-event-logs/m-p/3957097#M2609 Hi,<BR />I have just purchased a DL140 G3 server with Lights-Out 100i which works fine through the iLO ethernet port or in-band through the NIC. However, the information such as fan health etc is only available remotely. I would like to access this from the server itself under Windows Server 2003 Web Edition.<BR />Have tried everything I can think of including installing the DL140 IMPI driver and System Management Homepage for Proliant (which shows no sensors it can read) but to no avail. All I really want is failure and status notifications in the Windows System event log. Is this too much to ask?<BR /><BR />Any help very much appreciated!<BR />Thanks. Wed, 07 Mar 2007 02:30:55 GMT https://community.hpe.com/t5/server-management-remote-server/lights-out-100i-and-windows-event-logs/m-p/3957097#M2609 Jeremy Dore 2007-03-07T02:30:55Z