https://community.hpe.com/t5/server-management-remote-server/can-t-access-lo100i-on-dl140/m-p/3994090#M2726 I'll answer myself here: in order to guess the dhcp address of the LO100i interface I nmapped the subnet looking for addresses with open ports http and https. <BR />This is wrong as LO100i comes only on port 80 and telnet. Once I nmapped for the correct ports I found out the address easily. Wed, 09 May 2007 02:37:46 GMT ancarpan 2007-05-09T02:37:46Z https://community.hpe.com/t5/server-management-remote-server/can-t-access-lo100i-on-dl140/m-p/3994089#M2725 I have a DL140 set up and LO100i interface is connected to the network. On the same network I have several other DL385 with iLO and iLO2.<BR /><BR />While iLO(iLO2) interfaces come up on dhcp I can't seem to access the iLO100i interface in any way. Anyone can tell me if I'm doing something wrong?<BR /><BR />What more on the initial boot sequence of DL385 I can hit F8 to access ilo's configuration menu where I can define a static address: is there something similar for LO100i ?<BR /><BR />Thanks<BR /><BR />.a.c.<BR /> Fri, 04 May 2007 10:06:20 GMT https://community.hpe.com/t5/server-management-remote-server/can-t-access-lo100i-on-dl140/m-p/3994089#M2725 ancarpan 2007-05-04T10:06:20Z https://community.hpe.com/t5/server-management-remote-server/can-t-access-lo100i-on-dl140/m-p/3994090#M2726 I'll answer myself here: in order to guess the dhcp address of the LO100i interface I nmapped the subnet looking for addresses with open ports http and https. <BR />This is wrong as LO100i comes only on port 80 and telnet. Once I nmapped for the correct ports I found out the address easily. Wed, 09 May 2007 02:37:46 GMT https://community.hpe.com/t5/server-management-remote-server/can-t-access-lo100i-on-dl140/m-p/3994090#M2726 ancarpan 2007-05-09T02:37:46Z