topic Flashing a RILOE-II in Server Management - Remote Server Management

Flashing a RILOE-II

T R Matthews — Mon, 21 May 2007 09:02:19 GMT

HPONCFG gives me
"Firmware Revision = 2.410000 Device type = RILOE-II Driver name = sm2"

If I try to use hponcfg (v1.0c) to add a user

hponcfg /f my_adduser.xml

it prints "Firmware Revision = 2.410000 Device type = RILOE-II Driver name = sm2" and then hangs. I have left it at that point for hours and it doesn't time out.

I have also tried dumping the config using /w which works ok.

I have tried flashing the RILOE-II using cp006199.exe which presents me with an error "The software will not be installed because the required hardware is not present or the software/firmware doesn't apply to this system."

Now, it does mention 1.20 when I run the updater and I believe the current FW is 2.41 so maybe it's an old firmware - but I can't find anything newer.

I have this problem on all my RILOE-II cards, so I'm guessing it's me at fault.

Any pointers?

thanks,
Tim

Re: Flashing a RILOE-II

Todd Schelin — Mon, 21 May 2007 19:13:03 GMT

Tim,
Sounds like you do not have the Lights-out driver installed on your system. Driver has to be installed for the OS to talk to the Riloe, Riloe II and iLO.

Re: Flashing a RILOE-II

M.S.Srivatsa — Tue, 22 May 2007 01:59:10 GMT

http://h18023.www1.hp.com/support/files/lights-out/us/index.html
Please select the appropriate OS and management hardware from this link.

Re: Flashing a RILOE-II

Rajeshwari, Hiresave — Tue, 22 May 2007 02:01:27 GMT

First thing ...
RILOE-II does not come with firmware v. 2.41
RILOE-I card can have firmware v. 2.41.
If you can, check if your card is RILOE or RILOE II.

Hponcfg v 1.0 was the initial release and it was not having the ability to distinguish between RILOE I and RILOE II. This was fixed in the next release v 1.1.

Use the latest HPONCFG utility v 1.5.1.0 if you are running a Windows 2000 or Windows 2003.
You can download the latest HPONCFG binary from this link ...
http://h18023.www1.hp.com/support/files/server/us/download/24575.html

Also, for this HPONCFG to run, you need to upgrade your dirvers and agents ...
You can download the drivers and agents or the PSP itself from ...
http://h18023.www1.hp.com/support/files/server/us/locOsCat/69.html

Also,
You can also use either sp25759.exe or sp25758.exe to upgrade the RILOE I card version to 2.53 which is the latest instead of cp006199.exe which is for RILOE II.