topic Re: iLO Port Configuration in Server Management - Remote Server Management

iLO Port Configuration

FA_3 — Wed, 29 Aug 2007 15:22:39 GMT

Hi Guys,

I have few Red Hat Linux server which need iLO port configuration. Is there anyone who can guide me how to configure iLO?

As far I know you have to reboot the server and Press F8 to go to configuration menu.

What are the steps involved in this method ?

Is there anyway without rebooting the server ? If yes then what are the steps ?

Thank you very much.
FA

Re: iLO Port Configuration

acartes — Wed, 29 Aug 2007 16:36:41 GMT

Consider installing the iLO Red Hat support
http://h18004.www1.hp.com/support/files/lights-out/us/index.html
Particularly
the management interface driver
the online configuration utility
the XML scripting samples

You can use the online configuration utility to get/set iLO options using RIBCL/XML scripts from within the host OS. This means you do not need to reset the server.

Re: iLO Port Configuration

KarloChacon — Wed, 29 Aug 2007 20:08:14 GMT

hi FA

I hope this can help you

see the attached file about ilo configuration.

regards

Re: iLO Port Configuration

KarloChacon — Thu, 30 Aug 2007 01:08:10 GMT

hi again

yes I forgot

In case you want to reboot your server you have to press F8 when the integrated lights-out shows up on POST

by the a simulator attached
regards

Re: iLO Port Configuration

andrea annoe — Thu, 06 Sep 2007 03:18:06 GMT

Hi,
for complete the answer: if you connect you cable (specific HP cable usually for blade rack) on ilo interface you can configure directly your ILO (this is an emergency case) you don't reboot you system, attention default address is 192.168.1.1 , you connect directly with a notebook setting a correct network.

Bye bye Andrea.