topic Re: ILO via SSL-VPN http 1.1 error in Server Management - Remote Server Management

ILO via SSL-VPN http 1.1 error

Ingo Kusterer — Wed, 07 Nov 2007 14:23:19 GMT

I updated the HP Server to the newest ILO firmware, but still I have the problem that if I want to get onto the ILO-Website in an internal network with NAT from external through a firewall with SSL-VPN like Juniper SSL-VPN devices or Sonicwall devices I always get the error "http 1.1 incompatible browser" and I have no access to the Console nor the ilo-Website.
Is there any issue or has somebody a working solution?

Re: ILO via SSL-VPN http 1.1 error

acartes — Wed, 07 Nov 2007 15:46:22 GMT

There are a couple things to look at.

First, does the NAT route HTTP 1.1 traffic. the answer is probably yes.

Second, see if your browser is configured to use a proxy and that the proxy does not support http 1.1. This would cause the problem because the proxy can convert the requests to 1.0.

You can try making a proxy exception for the iLO. In IE, enter the iLO IP address in the proxy exceptions list here:
Tools \Internet Options \Connections \LAN Settings \Advanced

Re: ILO via SSL-VPN http 1.1 error

Ingo Kusterer — Thu, 08 Nov 2007 04:35:03 GMT

Hello, thanks for your help,
yes the nat router does support http 1.1 traffic!
The browser doesn't use a proxy, but is configured to support http 1.1 with/without proxy.
It's no problem to access the ilo-website from internal.