https://community.hpe.com/t5/server-management-remote-server/ilo2-no-video-when-start-windows-grafical/m-p/4159379#M3382 We have a problem with a ILO2 a BL460c. When the start screen graphical windows, I get a message that no video. If we started in VGA mode if we have video, but could not detect mouse. <BR />Do you now what is the problem?. Tue, 11 Mar 2008 15:22:57 GMT Carlos Clerigo 2008-03-11T15:22:57Z https://community.hpe.com/t5/server-management-remote-server/ilo2-no-video-when-start-windows-grafical/m-p/4159379#M3382 We have a problem with a ILO2 a BL460c. When the start screen graphical windows, I get a message that no video. If we started in VGA mode if we have video, but could not detect mouse. <BR />Do you now what is the problem?. Tue, 11 Mar 2008 15:22:57 GMT https://community.hpe.com/t5/server-management-remote-server/ilo2-no-video-when-start-windows-grafical/m-p/4159379#M3382 Carlos Clerigo 2008-03-11T15:22:57Z https://community.hpe.com/t5/server-management-remote-server/ilo2-no-video-when-start-windows-grafical/m-p/4159380#M3383 Here are some things to check:<BR /><BR />Are you using current iLO 2 firmware?<BR />Are you using iLO remote console or IRC to access the console?<BR />Check the iLO event logs for any errors.<BR />Make sure the server is ON.<BR /><BR />Verify you are remotely accesssing the server you believe you are administering. You can use the UID control to confirm this. Thu, 13 Mar 2008 19:10:30 GMT https://community.hpe.com/t5/server-management-remote-server/ilo2-no-video-when-start-windows-grafical/m-p/4159380#M3383 acartes 2008-03-13T19:10:30Z