topic Re: G3 DL380 Ilo in Server Management - Remote Server Management

G3 DL380 Ilo

Dany Boucher — Wed, 07 May 2008 12:43:26 GMT

Hi,

First of all sorry for my bad english writing its not my first language.

I just buy 6 second hand G3 DL380 (dual 2.8) at the hardware boot, im press F8 to configure and manage ILO ...

But its asking my for a user name and a password, and i dont have these informations :-(

There is any way to reset this informations ?

Thanks for your times and answer.

Dany

Re: G3 DL380 Ilo

Change_happens — Thu, 08 May 2008 05:35:08 GMT

There is a switch to reset iLO. see below thread:
http://forums11.itrc.hp.com/service/forums/questionanswer.do?threadId=227265&admit=109447626+1210228260311+28353475

This will reset iLO to default(factory) you need to give network settings again to make it available; again use F8 and do all.

Re: G3 DL380 Ilo

Change_happens — Thu, 08 May 2008 05:40:37 GMT

I think u can security override it using the information in thread:
http://forums11.itrc.hp.com/service/forums/questionanswer.do?threadId=668077so no need of setting things again. just password will override so after coming inside iLO you can set it again.

Re: G3 DL380 Ilo

Dany Boucher — Fri, 09 May 2008 12:04:45 GMT

Hi Ajay,

Thank you for your answer ...

everything is working now with your help.

Re: G3 DL380 Ilo

Change_happens — Fri, 09 May 2008 13:29:56 GMT

Your most Welcome Dany!! I am here for help others.