https://community.hpe.com/t5/server-management-remote-server/ilo2-is-disabled-how-do-i-boot-server/m-p/4210187#M3654 <!--!*#-->If I disable the ILO2 on my DL380 G5 how do I boot the server in the future since the ILO is disabled. Also is the machine accessable via IPMI if the ILO is disabled?<BR /><BR />Thanks in Advance! Wed, 04 Jun 2008 03:41:10 GMT baron.pilot 2008-06-04T03:41:10Z https://community.hpe.com/t5/server-management-remote-server/ilo2-is-disabled-how-do-i-boot-server/m-p/4210187#M3654 <!--!*#-->If I disable the ILO2 on my DL380 G5 how do I boot the server in the future since the ILO is disabled. Also is the machine accessable via IPMI if the ILO is disabled?<BR /><BR />Thanks in Advance! Wed, 04 Jun 2008 03:41:10 GMT https://community.hpe.com/t5/server-management-remote-server/ilo2-is-disabled-how-do-i-boot-server/m-p/4210187#M3654 baron.pilot 2008-06-04T03:41:10Z https://community.hpe.com/t5/server-management-remote-server/ilo2-is-disabled-how-do-i-boot-server/m-p/4210188#M3655 You will need to use the power button if the system is off and iLO is disabled. Disabling iLO specifically disables remote control/access to iLO over the network. Fri, 06 Jun 2008 05:44:34 GMT https://community.hpe.com/t5/server-management-remote-server/ilo2-is-disabled-how-do-i-boot-server/m-p/4210188#M3655 acartes 2008-06-06T05:44:34Z