topic Change ILO ip without rebooting server in Server Management - Remote Server Management

Change ILO ip without rebooting server

Mario couthino_1 — Thu, 24 Jul 2008 12:31:07 GMT

Is it possible to change the ip for ilo without rebooting the server. telnet to the port etc.

Environment is
BL640 in a c class Chassie

Re: Change ILO ip without rebooting server

barnett chan — Thu, 24 Jul 2008 17:17:24 GMT

Changing the network settings (and most ports) requires an iLO reset, but the server do not need to be reboot. You need to know what your new iLO ip is or your DNS needs to be working correctly.
Hope this helps.

Re: Change ILO ip without rebooting server

Blazhev_1 — Thu, 24 Jul 2008 18:15:42 GMT

hi,

login to ilo and go to the Administration tab, then to network settings and at the bottow there is a field to change the IP adress. This will reset ilo(not server) and you will have to login with the new IP after that.

Re: Change ILO ip without rebooting server

HPMAN_1 — Mon, 20 Apr 2009 17:21:40 GMT

a blade was moved from 1 enclosure to another with a different ip subnet. I am unable to login to the ilo and the ip address was statically set. How can I reset the ip for the ILO?

Re: Change ILO ip without rebooting server

David Claypool — Mon, 20 Apr 2009 20:39:20 GMT

If you have the ProLiant Support Pack loaded, you can use the HPONCFG utility from the host OS to set/change iLO's configuration.

http://www.hp.com/go/ilo --> Documents and Drivers