https://community.hpe.com/t5/server-management-remote-server/ilo-power-config-settings/m-p/4242045#M3800 I got it to work. I set the iLO back to factory defaults and now the setting works. Tue, 29 Jul 2008 12:13:48 GMT Jon_151 2008-07-29T12:13:48Z https://community.hpe.com/t5/server-management-remote-server/ilo-power-config-settings/m-p/4242044#M3799 This is on a DL380 G3 with standard iLO Firmware Version: 1.92 04/24/2008 <BR /><BR />I set the server to be automatically powered on and press submit. I log out then back in and automatically powered on is still set to yes. If I removed power and plug it back in the server does not start and the automatically powered on setting is set to off.<BR /><BR />Any help is greatly appreciated. Tue, 29 Jul 2008 11:13:10 GMT https://community.hpe.com/t5/server-management-remote-server/ilo-power-config-settings/m-p/4242044#M3799 Jon_151 2008-07-29T11:13:10Z https://community.hpe.com/t5/server-management-remote-server/ilo-power-config-settings/m-p/4242045#M3800 I got it to work. I set the iLO back to factory defaults and now the setting works. Tue, 29 Jul 2008 12:13:48 GMT https://community.hpe.com/t5/server-management-remote-server/ilo-power-config-settings/m-p/4242045#M3800 Jon_151 2008-07-29T12:13:48Z