topic iLO2 Shared Access in Server Management - Remote Server Management https://community.hpe.com/t5/server-management-remote-server/ilo2-shared-access/m-p/4276731#M3912 I want to configure my servers to use the main port in a shared configuration.<BR /><BR />Info:<BR />Data (Server) VLAN: 102<BR />iLO VLAN: 105<BR /><BR />This is how i have my cisco port configured but i am not getting a lease from my DHCP server.<BR /><BR />Current configuration : 183 bytes<BR />!<BR />interface GigabitEthernet2/9<BR /> switchport<BR /> switchport trunk native vlan 102<BR /> switchport trunk allowed vlan 102,105<BR /> switchport mode trunk<BR /> no ip address<BR /> spanning-tree portfast<BR />end<BR /><BR />The native vlan part for the server works great but configuring the iLO2 for vlan 105 doesnt allow it to work for some reason.<BR /><BR />Does DHCP work in the shared configuration with a VLAN enabled?<BR /> Fri, 26 Sep 2008 11:06:16 GMT Daren Daigle 2008-09-26T11:06:16Z iLO2 Shared Access https://community.hpe.com/t5/server-management-remote-server/ilo2-shared-access/m-p/4276731#M3912 I want to configure my servers to use the main port in a shared configuration.<BR /><BR />Info:<BR />Data (Server) VLAN: 102<BR />iLO VLAN: 105<BR /><BR />This is how i have my cisco port configured but i am not getting a lease from my DHCP server.<BR /><BR />Current configuration : 183 bytes<BR />!<BR />interface GigabitEthernet2/9<BR /> switchport<BR /> switchport trunk native vlan 102<BR /> switchport trunk allowed vlan 102,105<BR /> switchport mode trunk<BR /> no ip address<BR /> spanning-tree portfast<BR />end<BR /><BR />The native vlan part for the server works great but configuring the iLO2 for vlan 105 doesnt allow it to work for some reason.<BR /><BR />Does DHCP work in the shared configuration with a VLAN enabled?<BR /> Fri, 26 Sep 2008 11:06:16 GMT https://community.hpe.com/t5/server-management-remote-server/ilo2-shared-access/m-p/4276731#M3912 Daren Daigle 2008-09-26T11:06:16Z Re: iLO2 Shared Access https://community.hpe.com/t5/server-management-remote-server/ilo2-shared-access/m-p/4276732#M3913 Soes your switch have DHCP on vlan 102, but iLO on vlan 105? I think you may need to configure DHCP to be on both vlans. Fri, 26 Sep 2008 15:28:58 GMT https://community.hpe.com/t5/server-management-remote-server/ilo2-shared-access/m-p/4276732#M3913 acartes 2008-09-26T15:28:58Z Re: iLO2 Shared Access https://community.hpe.com/t5/server-management-remote-server/ilo2-shared-access/m-p/4276733#M3914 Yes, i have DHCP running properly on VLAN 105. But it is not getting it. Fri, 26 Sep 2008 15:50:22 GMT https://community.hpe.com/t5/server-management-remote-server/ilo2-shared-access/m-p/4276733#M3914 Daren Daigle 2008-09-26T15:50:22Z