https://community.hpe.com/t5/server-management-remote-server/enable-ilo2-using-scripts/m-p/4304233#M3982 Is it possible to enable iLo2 from scripts? We have a server that I think has the iLo2 disabled and I need to disable it. I'd prefer not to have to shut down the server and have one of the on-site contacts perform the work if possible.<BR /><BR />If not, does the 2.0.4.1 configuration software have the ability to do this? If so, I'll have to get approval for .NET 2.0 Tue, 11 Nov 2008 17:14:37 GMT Graeme Bray 2008-11-11T17:14:37Z https://community.hpe.com/t5/server-management-remote-server/enable-ilo2-using-scripts/m-p/4304233#M3982 Is it possible to enable iLo2 from scripts? We have a server that I think has the iLo2 disabled and I need to disable it. I'd prefer not to have to shut down the server and have one of the on-site contacts perform the work if possible.<BR /><BR />If not, does the 2.0.4.1 configuration software have the ability to do this? If so, I'll have to get approval for .NET 2.0 Tue, 11 Nov 2008 17:14:37 GMT https://community.hpe.com/t5/server-management-remote-server/enable-ilo2-using-scripts/m-p/4304233#M3982 Graeme Bray 2008-11-11T17:14:37Z https://community.hpe.com/t5/server-management-remote-server/enable-ilo2-using-scripts/m-p/4304234#M3983 If you have The management interface driver and management agents installed on the server the HP Lights-Out Online Configuration Utility will allow you to modify the iLO settings. It does require the .NET 2.0 framework to function Wed, 12 Nov 2008 03:47:41 GMT https://community.hpe.com/t5/server-management-remote-server/enable-ilo2-using-scripts/m-p/4304234#M3983 Jimmy Vance 2008-11-12T03:47:41Z