topic Re: DL 360 G3 iLO - Password in Server Management - Remote Server Management

DL 360 G3 iLO - Password

Brendan_17 — Tue, 13 Apr 2004 13:53:50 GMT

I have not been able to log into the iLO managment site on any of the DL360 server. Where is the username and password located? The DL 380 G3 had tags attached.

Is there a default password that I should try?

Re: DL 360 G3 iLO - Password

David Claypool — Tue, 13 Apr 2004 13:59:07 GMT

Pop the top and find the diagram on the inside of the cover. There is an 'iLO Security Override Switch' that lets you bypass the login/password so you can set a new one.

Alternatively, create a DOS boot disk and use CPQLODOS from the SmartStart Scripting Toolkit to overwrite the current config (overwrite, not change).

Both of these methods are not considered to violate access security because they both require physical access to the box.

Re: DL 360 G3 iLO - Password

acartes — Thu, 22 Apr 2004 11:34:10 GMT

The "toe tags" contain the default Administrator credentials for iLO. One tears-off (perforation) and one remains adhered to the outside chassis. You must slide the server out of the rack a bit to see the adhered label.

Re: DL 360 G3 iLO - Password

Brendan_17 — Wed, 28 Apr 2004 16:07:20 GMT

Ok Great, we scheduled an outage and I actually pulled the servers to id the passwords on the stickers. Thanks Guys I would have never know the stickers were applied on the servers.