https://community.hpe.com/t5/server-management-remote-server/server-ilo2-will-not-update-ip-address/m-p/4420967#M4385 I have tried using EBIPA and just letting the servers pull DHCP but they seem stuck on their IP address. These did come from a different detached environment. Fri, 15 May 2009 15:41:01 GMT namomo 2009-05-15T15:41:01Z https://community.hpe.com/t5/server-management-remote-server/server-ilo2-will-not-update-ip-address/m-p/4420967#M4385 I have tried using EBIPA and just letting the servers pull DHCP but they seem stuck on their IP address. These did come from a different detached environment. Fri, 15 May 2009 15:41:01 GMT https://community.hpe.com/t5/server-management-remote-server/server-ilo2-will-not-update-ip-address/m-p/4420967#M4385 namomo 2009-05-15T15:41:01Z https://community.hpe.com/t5/server-management-remote-server/server-ilo2-will-not-update-ip-address/m-p/4420968#M4386 Sounds like the DHCP option is not activated on the ILO. Mon, 18 May 2009 05:22:38 GMT https://community.hpe.com/t5/server-management-remote-server/server-ilo2-will-not-update-ip-address/m-p/4420968#M4386 Cederberg 2009-05-18T05:22:38Z https://community.hpe.com/t5/server-management-remote-server/server-ilo2-will-not-update-ip-address/m-p/4420969#M4387 1.Reboot the server and check if you are getting the prompt<BR />"Integrated Lights Out Press F8 to configure".?<BR /><BR />2.enter F8 try to load default. Mon, 16 Nov 2009 05:44:08 GMT https://community.hpe.com/t5/server-management-remote-server/server-ilo2-will-not-update-ip-address/m-p/4420969#M4387 JCChang 2009-11-16T05:44:08Z